THS710A / THS720A THS730A / THS720P TekScope

Átírás

1 THS710A/ THS720A THS730A/ THS720P TekScope

2 Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. Printed in the U.S.A. Tektronix, Inc., P.O. Box 1000, Wilsonville, OR TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. Tek Secure is a registered trademark of Tektronix, Inc. TekTools, TekScope, and IsolatedChannel are trademarks of Tektronix, Inc.

3 WARRANTY Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and workmanship for a period of three (3) years from the date of purchase from an authorized Tektronix distributor. If any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. Batteries are excluded from this warranty. In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective product to the service center designated by Tektronix, shipping charges prepaid, and with a copy of customer proof of purchase. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction caused by the use of non Tektronix supplies; or d) to service a product that has been modified or integrated with other products when the effect of such modification or integration increases the time or difficulty of servicing the product. THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE LISTED PRODUCTS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

4 Service Assurance If you have not already purchased Service Assurance for this product, you may do so at any time during the product s warranty period. Service Assurance provides Repair Protection and Calibration Services to meet your needs. Repair Protection extends priority repair services beyond the product s warranty period; you may purchase up to three years of Repair Protection. Calibration Services provide annual calibration of your product, standards compliance and required audit documentation, recall assurance, and reminder notification of scheduled calibration. Coverage begins upon registration; you may purchase up to five years of Calibration Service. Service Assurance Advantages Priced well below the cost of a single repair or calibration Avoid delays for service by eliminating the need for separate purchase authorizations from your company Eliminates unexpected service expenses For Information and Ordering For more information or to order Service Assurance, contact your local Tektronix representative and provide the information below. Service Assurance may not be available in locations outside the United States of America. Name Company Address City, State, Postal code Country Phone VISA or Master Card expiration date or purchase order number Repair Protection (1,2 or 3 years) Calibration Service (1,2,3,4 or 5 years) Instrument model and serial number Instrument purchase date To learn the location of your nearest Tektronix representative, please call TEK-WIDE in North America, elsewhere, or look us up on the World Wide Web at

5 i

6 ii

7 iii

8 iv

9 v

10 vi

11 vii

12 viii

13 ix

14 x

15

16

17 1 1

18 1 2

19 1 3

20 1 4

21 ON/STBY STBY 1 5

22 ON/STBY STBY 1 6

23 1 7

24 1 8

25 1 9

26 1 10

27

28

29 2 1

30 2 2

31 2 3

32

33

34

35

36 2 8

37 2 9

38 2 10

39 2 11

40 2 12

41 2 13

42 2 14

43 2 15

44 2 16

45 2 17

46 29.23 k 2 18

47 2 19

48 Ch 1 Freq MHz 2 20

49 2 21

50 Data CS 12.6 ns 2 22

51 2 23

52 2 24

53 2 25

54 2 26

55 SCOPE AUTO RANGE ACQUIRE Acquire Mode Envelope SCOPE TRIGGER TriggerType Pulse MENU Trigger Source Ch1 Polarityand Width Trigger When Mode Positive Less Than- Width Normal 500s 2 27

56 2 28

57 SCOPE TRIGGER TriggerType Edge MENU Trigger External Source 2 29

58 2 30

59 SCOPE AUTO RANGE ACQUIRE Stop After Single Acquisition Sequence HOLD (RUN/STOP) 2 31

60 2 32

61 SCOPE VERTICAL MENU AUTO RANGE ProbeType Voltage 1X Probe DISPLAY DisplayStyle Dot 100 ms Accumulate TRIGGER TriggerType Video MENU TriggerOn OddField SCOPE TRIGGER TriggerType Video MENU TriggerOn OddField 2 33

62 2 34

63 2 35

64 2 36

65 SCOPE CH 1 CH 2 AUTO RANGE 2 37

66 100 mv/a 2 38

67 SCOPE CH 1 CH 2 Probe Type Current Probe AUTO RANGE MATH Math Ch1Ch2 Operation CURSOR Cursor Paired Function 100 mv/a SCOPE MEAS Select Measrmnt for MATH OK Select Measrmnt Mean 2 39

68 2 40

69 METER VAC ACQUIRE AcquireMode PeakDetect SCOPE CURSOR Cursor Function VBars 2 41

70 2 42

71 SCOPE AUTO RANGE TRIGGER TriggerType Pulse MENU Trigger Ch1 Source Polarityand Negative 20 ms Width TriggerWhen GreaterThan Width Mode Normal 2 43

72 P3 P2 P1 2 44

73 SCOPE DISPLAY Harmonics On Show All Fto11 THDMethod THD-F Probes Ch2Probe 100 mv/a 2 45

74 S3 P3 P2 P1 S2 S1 N 2 46

75 DISPLAY Harmonics On Probes Current Probe CH2 MATH 100 mv/a 2 47

76 2 48

77 SCOPE CH1 ProbeType Current Probe ACQUIRE StopAfter Single Acquisition Sequence HOLD (RUN/STOP) 100 mv/a RMS RMS 10 SECDIV BrstW 100 SECDIV BrstW 2 49

78 1200 min khz 60 sec min 1 2 khz 250 s

79 SCOPE CH1 CH2 ProbeType Current Probe HORIZON- TAL MENU Trigger Position TRIGGER TriggerType Pulse MENU Trigger Ch1 Source Polarityand Width Positive CURSOR TriggerWhen 50% EqualTo Width 100 mv/a 250s 5% Mode Normal Cursor Paired Function 2 51

80 2 52

81 SCOPE AUTO RANGE TRIGGER MENU TriggerType Motor SCOPE CURSOR Cursor Function HORIZON- TAL MENU SetDelay WithCursor V Bars VBars 2 53

82 2 54

83

84

85 3 1

86 3 2

87 SCOPE ACQUIRE AcquireMode Sample PeakDetect Envelope Average StopAfter HOLDButton Only SingleAcquisitionSequence ForceTrigger 3 3

88 Sample Peak Detect Peak Detect 3 4

89 Envelope Average 3 5

90 3 6

91 METER ACQUIRE AcquireMode Sample PeakDetect Average Rel On Off Acquisition Modes Rel 3 7

92 3 8

93 3 9

94 3 10

95 SCOPE CURSOR CursorFunction Off HBars VBars Paired TimeUnits Set0and360 withvbars Seconds 1/seconds(Hz) Degrees 3 11

96 3 12

97 SCOPE DISPLAY Harmonics THS720P DisplayStyle Display Contrast Graticule Format Off Vectors Dots VectorAccumulate DotAccumulate Full Grid CrossHair Frame YT XY 3 13

98 3 14

99 3 15

100 SCOPE DISPLAY Harmonics On Show Display Contrast THDMethod Probes Allfrom Oddfrom Evenfrom THD-F THD-R Ch1Probe Ch2Probe 3 16

101 3 17

102 3 18

103 3 19

104 3 20

105 METER DISPLAY LineStyle Thin Thick DisplayContrast Graticule Full Grid CrossHair Frame 3 21

106 3 22

107 SCOPE UTILITY System HardCopy METER Layout Landscape Portrait Format Select Page SelectPage OK SelectFormat 3 23

108 3 24

109 3 25

110 3 26

111 SCOPE HORIZON- TimeBase Main TAL Delayed Runs MENU After Main Trigger Position DisplayTat TrigPt SetDelayWith CursorVBars Setto10% Setto50% Setto90% %Pretrigger On Off % 3 27

112 3 28

113 3 29

114 METER HORIZONTAL MENU 3 30

115 SCOPE MEAS Select Meastmnt SelectPage Remove Measrmnt Measrmnt AllMeasrmnts Gating & Measrmnt Off High-Low On Setup High-Low Method Histogram Min/Max OKSelect Measrmnt OKRemove Measrmnt 3 31

116 3 32

117 3 33

118

119 Negative Width Negative Duty Cycle 100% Period Negative Overshoot Low Min 100% Amplitude Amplitude = Max Min Positive Duty Cycle Positive Width 100% Period Positive Overshoot Max High 100% Amplitude 3 35

120 METER MEAS Select Statisticfor DMM Max Avg Min Rel Max Min SelectPage Remove Statistic Statistic AllStatistics BeepNew Max-Min OKSelect Statistic OKRemove Statistic On Off 3 36

121 RelRel 3 37

122 METER METER VAC VDC 3 38

123 3 39

124 3 40

125 3 41

126 3 42

127 3 43

128 SCOPE SAVE/ RECALL SaveCurrent Setup ToSetup RecallSaved Setup RecallFactory Setup RecallSetup Saveselected wfm ToWaveform RecallSaved Waveform LoadREFA FromWfrm OK Save Setup LoadREFB FromWfrm OK Recall Setup OKRecall Factory OKSave Waveform OKRecall Waveform 3 44

129 3 45

130 METER SAVE/ RECALL SaveCurrent Setup ToSetup RecallSaved Setup Recall FactorySetup RecallSetup Save DMMData ToData Recall DMMData RecallData ClearData FromScreen OK Save Setup OK Recall Setup OK Recall Factory OK Save Data OK Recall Data OK Clear Data 3 46

131 3 47

132 3 48

133 3 49

134 3 50

135 3 51

136 3 52

137 3 53

138 Slope Coupling (Ch1 or Ch2) Source Polarity & width Source Trigger when Source Trigger on Video Class 3 54

139 SCOPE TRIGGER TriggerType Edge MENU TriggerSource Ch1 Ch2 Ext.[DMM] Trigger Coupling TriggerSlope Mode& Holdoff DC HFReject LFReject NoiseReject / \ Auto Normal 3 55

140 3 56

141 SCOPE TRIGGER TriggerType Pulse MENU TriggerSource Ch1 Ch2 Polarity& Width TriggerWhen Positive Negative LessThan Width Mode&Holdoff GreaterThan Width EqualToWidth NotEqualTo Width Auto Normal ±% 3 57

142 3 58

143 SCOPE TRIGGER TriggerType Video MENU TriggerSource Ch1 Ch2 TriggerOn Video Class Mode&Holdoff OddField EvenField AnyField Lines NTSC PAL SECAM Custom Scan Rate Auto Normal 3 59

144 SCOPE TRIGGER TriggerType Motor MENU TriggerSource Ch1 Ch2 Trigger Coupling TriggerSlope Mode& Holdoff DC AC / \ Auto Normal 3 60

145 3 61

146 SCOPE UTILITY System Config METER TekSecureErase Memory Version OK EraseSetup/Data 3 62

147 SCOPE UTILITY System RS-232 BaudRate METER Flagging HardFlagging On SoftFlagging Off Misc EOL CR LF CR/LF LF/CR Parity None Even Odd StopBits 1 2 Delay SetRS232 Parametersto Defaults 3 63

148 SCOP UTILITY System Misc PowerOff METER Time-Out BacklightTime- Out 3 64

149 SCOPE UTILITY System Cal METER SignalPath FactoryScope FactoryDMM OKCompensate SignalPath OKFactoryCal Scope OKFactoryCal DMM 3 65

150 SCOPE METER UTILITY System Diag Execute Loop ErrorLog OKRunTest Once Always UntilFail OKDisplayLog 3 66

151 3 67

152 SCOPE VERTICAL MENU Coupling Invert DC AC GND Invert Off Invert On Bandwidth Full Bandwidth 20 MHz Position Probe Type Current Probe Voltage Probe 3 68

153 SCOPE VERTICAL MENU MathOperation Ch1+Ch2 Ch1 Ch2 Ch2 Ch1 Ch1 Ch2 3 69

154 SCOPE VERTICAL SaveCh1 ToWaveform MENU SaveCh2 SaveMATH Horizontal Position OK Save Waveform Lock Ind 3 70

155 METER VERTICAL MENU Position Zoom Off 2X 5X 10X NoiseReject None 60Hz 50Hz VoltsScale Volts db dbminto ProbeType CurrentProbe VoltageProbe 3 71

156 3 72

157

158

159 A 1

160 ±± A 2

161 A 3

162 ± ± ± ± A 4

163 ± A 5

164 A 6

165 A 7

166 ± ± ± ± ± ± ± THD-F V 2 V 2 RMS f ± V f A 2 A 2 RMS f A f THD-R V 2 V 2 RMS f ± ± V RMS A 2 RMS A 2 f A RMS A 8

167 W 1 n V n A n n VA V RMS A RMS VAR (VA) 2 W 2 ± (PF) W VA A 9

168 A 10

169 ± ± A 11

170 ± A 12

171 ± ± ± A 13

172 ± ± A 14

173 ± A 15

174 A 16

175 A 17

176 A 18

177 A 19

178 A 20

179 B 1

180 B 2

181 C 1

182 C 2

183 C 3

184 C 4

185 C 5

186 C 6

187 D 1 ± ± ± ± ±

188 D 2

189 D 3

190 D 4

191 SCOPE UTILITY System Diag Loop Once Execute OKRunTest D 5

192 SCOPE SAVE/ RECALL RecallSaved Setup OKRecall Factory RecallFactory Setup CH1 VERTICAL ProbeType VoltageProbe 1 MENU ACQUIRE AcquireMode Average 16 MEAS Select Mean* Measrmnt OKSelect Measrmnt + D 6

193 D 7

194 SCOPE SAVE/ RECALL RecallSaved Setup OKRecall Factory RecallFactory Setup ACQUIRE AcquireMode Average 16 TRIGGER MEAS Trigger Coupling Gating & High- LowSetup Select Measrmnt OKSelect Measrmnt NoiseReject High-Low Min/Max Method Pk-Pk* D 8

195 D 9

196 SCOPE CH 1 WAVE- FORM OFF CH 2 TRIGGER Trigger Source Ch2 MEAS Gating & High- High-Low Min/Max Low Setup Method Select Measrmnt Pk-Pk* OK Select Measrmnt D 10

197 D 11

198 SCOPE SAVE/ RECALL VERTICAL MENU RecallSaved Setup RecallFactory Setup OK RecallFactory ProbeType VoltageProbe 1 D 12

199 SCOPE HORIZON- TAL MENU TimeBase DelayedRuns AfterMain CLEAR MENU SCOPE HORIZON- TAL MENU CLEAR MENU TimeBase DelayedRuns AfterMain 10 ms D 13

200 SCOPE SAVE/ RECALL RecallSaved Setup OKRecall Factory RecallFactory Setup ACQUIRE AcquireMode Average 16 TRIGGER TriggerMode Normal MEAS Gating & High- High-Low Min/Max LowSetup Method Select Ampl* Measrmnt OKSelect Measrmnt D 14

201 SCOPE TRIGGER TriggerSlope \ SCOPE TRIGGER TriggerSlope / D 15

202 SCOPE CH 1 WAVE- FORM OFF CH 2 TRIGGER Trigger Source Ch2 MEAS Gating & High- High-Low Min/Max Low Setup Method Select Measrmnt Pk-Pk* OK Select Measrmnt D 16

203 SCOPE TRIGGER TriggerSlope \ D 17

204 METER VDC + D 18

205 D 19

206 METER VAC D 20

207 D 21

208 METER D 22

209 D 23

210 D 24

211 E 1

212 E 2

213 F 1

214 F 2