EOG EN OVEN USER MANUAL 2 HU SÜTŐ HASZNÁLATI ÚTMUTATÓ 25

Átírás

1 EOG EN OVEN USER MANUAL 2 HU SÜTŐ HASZNÁLATI ÚTMUTATÓ 25

2 2 CONTENTS 1. SAFETY INFORMATION SAFETY INSTRUCTIONS PRODUCT DESCRIPTION BEFORE FIRST USE DAILY USE CLOCK FUNCTIONS USING THE ACCESSORIES ADDITIONAL FUNCTIONS HELPFUL HINTS AND TIPS CARE AND CLEANING WHAT TO DO IF TECHNICAL DATA INSTALLATION WE RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you ll get great results every time. Welcome to Electrolux. Visit our website for: Get usage advice, brochures, trouble shooter, service information: Register your product for better service: Buy Accessories, Consumables and Original spare parts for your appliance: CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Number. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.

3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety Risk of suffocation, injury or permanent disability. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a person who is responsible for their safety. Do not let children play with the appliance. Keep all packaging away from children. Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot. If the appliance has a child safety device, we recommend that you activate it. Cleaning and user maintenance shall not be made by children without supervision. 1.2 General Safety ENGLISH 3 Only a qualified person must install this appliance and replace the cable. Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware. Do not use a steam cleaner to clean the appliance. Before maintenance cut the power supply.

4 4 Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. 2. SAFETY INSTRUCTIONS This appliance is suitable for the following markets: HU 2.1 Installation Only a qualified person must install this appliance. Remove all the packaging. Do not install or use a damaged appliance. Obey the installation instruction supplied with the appliance. Always be careful when you move the appliance because it is heavy. Always wear safety gloves. Do not pull the appliance by the handle. Keep the minimum distance from the other appliances and units. Make sure that the appliance is installed below and adjacent safe structures. The sides of the appliance must stay adjacent to appliances or to units with the same height. Electrical connection Risk of fire and electrical shock. All electrical connections should be made by a qualified electrician. The appliance must be earthed. Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable. Do not let mains cables to come in touch with the appliance door, specially when the door is hot. The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. Gas connection All gas connections should be made by a qualified person. Before installation, make sure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.

5 ENGLISH 5 Make sure that there is air circulation around the appliance. The information about the gas supply is on the rating plate. This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation. 2.2 Use Risk of injury, burns or electric shock or explosion. Use this appliance in a household environment. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Deactivate the appliance after each use. Be careful when you open the appliance door while the appliance is in operation. Hot air can release. Do not operate the appliance with wet hands or when it has contact with water. Do not apply pressure on the open door. Do not use the appliance as a work surface or as a storage surface. Always keep the appliance door closed when the appliance is in operation. Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. Do not let sparks or open flames to come in contact with the appliance when you open the door. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Risk of damage to the appliance. To prevent damage or discoloration to the enamel: do not put ovenware or other objects in the appliance directly on the bottom. do not put aluminium foil directly on the bottom of the appliance. do not put water directly into the hot appliance. do not keep moist dishes and food in the appliance after you finish the cooking. be careful when you remove or install the accessories. Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of the warranty law. Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent. This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. Always cook with the oven door closed. 2.3 Care and Cleaning Risk of injury, fire or damage to the appliance. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Make sure the appliance is cold. There is the risk that the glass panels can break. Replace immediately the door glass panels when they are damaged. Contact the Service. Be careful when you remove the door from the appliance. The door is heavy! Clean regularly the appliance to prevent the deterioration of the surface material. Remaining fat or food in the appliance can cause fire. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. If you use an oven spray, obey the safety instructions on the packaging. Do not clean the catalytic enamel (if applicable) with any kind of detergent.

6 Internal light The type of light bulb or halogen lamp used for this appliance, is only for household appliances. Do not use it for house lighting. Risk of electrical shock. Before replacing the lamp, disconnect the appliance from the power supply. Only use lamps with the same specifications. Contact your municipal authority for information on how to discard the appliance correctly. Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Flat the external gas pipes. Remove the door catch to prevent children and pets to get closed in the appliance 2.5 Disposal Risk of injury or suffocation. 3. PRODUCT DESCRIPTION Control panel 2 Power indicator 3 Grill indicator 4 Gas oven control knob 5 Oven function control knob 6 Minute Minder 7 Air vents for the cooling fan 8 Grill 9 Oven lamp 10 Turnspit hole 11 Fan 12 Oven cavity bottom plate 13 Rating plate 3.1 Oven accessories Wire shelf For cookware, cake tins, roasts. Aluminium baking tray For cakes and biscuits. Turnspit For roasting larger joints of meat and poultry.

7 4. BEFORE FIRST USE Refer to the Safety chapters. 4.1 Initial cleaning Remove all accessories and removable shelf supports (if applicable). Clean the appliance before first use. Refer to the chapter "Care and cleaning". 4.2 Preheating Preheat the empty appliance to burn off the remaining grease. 1. Set the function and the maximum temperature ENGLISH 7 2. Let the appliance operate for minutes. 3. Set the function and the maximum temperature. 4. Let the appliance operate for 5 10 minutes. Accessories can become hotter than in normal use. The appliance can emit odour and smoke. This is normal. Make sure that the airflow is sufficient. Let the oven cool down. Dampen a soft cloth with warm water and a little mild washing-up liquid and use this to clean the oven cavity. 5. DAILY USE Refer to the Safety chapters. 5.1 Oven Functions Oven function OFF position Application The appliance is off. Oven lamp To activate the oven lamp without a cooking function. Electric grill with turnspit Range of temperature adjustment 5.2 Power indicator The power indicator comes on only when you turn the oven function control knob. To grill meat, including kebabs and smaller pieces of meat. To adjust the temperature for the electric grill (from a minimum of about 50 ºC to a maximum of about 200 ºC). To bake on more than one shelf positions at the same time. To dry food. To be used in combination with the burner of the gas oven 5.3 Gas oven control knob True fan cooking Symbol Function The oven burner is off

8 8 Symbol min Function Range of temperature adjustment. 5.4 Gas oven cooking Ignition of oven gas burner: 1. Open the oven door. 2. Press the gas oven control knob and turn it to. Keep it pushed for some seconds, but no more than 15 seconds. Do not release it until the flame comes on. Manual ignition: If there is no power supply, temporarily. 1. Open the oven door. 2. Hold a flame near the hole in the bottom of the oven cavity. 3. At the same time push the gas oven control knob and turn it counterclockwise to the maximum temperature. 4. When the flame comes on, keep the gas oven control knob pushed for approximately 15 seconds. Control the flame through the holes in the bottom of the oven. If the oven gas burner does not come on or if it accidentally goes out: 1. Release the gas oven control knob and turn it to the Off position. 2. Leave the oven door open. 3. After one minute, try to light the oven gas burner again. After ignition: 1. Release the gas oven control knob. 2. Close the oven door. 3. Turn the gas oven control knob to the necessary temperature setting. Oven safety device: The gas oven has a thermocouple. It stops the gas flow, if the flame goes out. You can not use the gas oven and the electrical grill with turnspit (if present) at the same time. 5.5 Using the Fan Gas Oven Always cook with the oven door closed. The gas burner heats up the air inside the oven. The fan moves hot air to keep the equal temperature. 1. Light the oven gas burner (refer to "Gas Oven Cooking ). 2. Upon ignition, turn the oven function control knob to position. 5.6 Grilling The oven fan starts after approximately 10 minutes of cooking. 1. Turn the oven function control knob clockwise to. The symbol on the control knob indicates the temperature range. (from a minimum of about 50ºC to a maximum of about 200 C) 2. Adjust the grill and the grid pan runner position to allow for different thickness of food. Place the food close to the top element for faster

9 ENGLISH 9 cooking and further away for more gentle cooking. You should place most foods on the grid in the grill pan to allow maximum circulation of air and to lift the food out of the fats and juices. If you prefer, you may place directly on the grill pan food such as fish, liver and kidneys. To minimise splashing, you should thoroughly dry food before grilling. Brush lean meats and fish lightly with a little oil or melted butter to keep them moist during cooking. You may place accompaniments such as tomatoes and mushrooms underneath the grid when grilling meats. You should use the top runner position when toasting bread. You should turn over the food during cooking, as you require. 5.7 Grill indicator The grill indicator (refer to "Product description") comes on when the grill cooking function is selected. It goes off when the oven reaches the correct temperature. It then cycles on and off to show the temperature adjusts. 6. CLOCK FUNCTIONS 6.1 Minute Minder Use it to set a countdown time for an oven function. This function has no effect on the operation of the oven. 1. Turn the knob for the timer as far as it goes, then turn it to necessary time period. 2. After the time period is completed, an acoustic signal sounds. 7. USING THE ACCESSORIES Refer to the Safety chapters. 7.1 Turnspit Be careful when you use the turnspit. The forks and the spit are sharp. There is a risk of injury. A B C D Use oven gloves when you remove the turnspit. The turnspit and the grill are hot. There is a risk of burns. A) Handle B) Spit C) Forks D) Turnspit frame 1. Put the turnspit handle into the spit. 2. Put the roasting pan on the lowest shelf level.

10 Put the turnspit frame on the second shelf position from the bottom. 4. Install the first fork on the spit, then put the meat on the turnspit and install the second fork. 5. Use the screws to tighten the forks. 6. Put the tip of the spit into the turnspit hole. Refer to "Product description". 7. Put the front part of the spit on the turnspit frame. 8. Remove the turnspit handle. 9. Turn the knob for the oven functions to. The turnspit rotates. 10 Set the necessary temperature. Refer. to the cooking tables. 8. ADDITIONAL FUNCTIONS 8.1 Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan continues to operate until the temperature in the appliance cools down. 9. HELPFUL HINTS AND TIPS The appliance has four shelf levels. Count the shelf levels from the bottom of the appliance floor. The appliance has a special system which circulates the air and constantly recycles the steam. With this system you can cook in a steamy environment and keep the food soft inside and crusty outside. It decreases the cooking time and energy consumption to a minimum. Moisture can condense in the appliance or on the door glass panels. This is normal. Always stand back from the appliance when you open the appliance door while cooking. To decrease the condensation, operate the appliance for 10 minutes before cooking. Clean the moisture after each use of the appliance. Do not put the objects directly on the appliance floor and do not put aluminium foil on the components when you cook. This can change the baking results and cause damage to the enamel. 9.1 Baking cakes Do not open the oven door before 3/4 of the set cooking time is up. If you use two baking trays at the same time, keep one empty level between them.

11 9.2 Cooking meat and fish Use a deep pan for very fatty food to prevent the oven from stains that can be permanent. Leave the meat for approximately 15 minutes before carving so that the juice does not seep out. To prevent too much smoke in the oven during roasting, add some water into the deep pan. To prevent the smoke condensation, add water each time after it dries up. 9.3 Cooking times ENGLISH 11 Cooking times depend on the type of food, its consistency, and volume. Initially, monitor the performance when you cook. Find the best settings (heat setting, cooking time, etc.) for your cookware, recipes and quantities when you use this appliance. 9.4 Baking and roasting table CAKES TYPE OF DISH Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes Whisked recipes In a cake mould Shortbread In a cake mould dough Buttermilk cheesecake Apple cake (Apple pie) In a 26 cm cake mould on a wire shelf 2 (left and right) In two 20 cm cake moulds on a wire shelf 1) Strudel In a baking tray Jam-tart 2 (left and In a 26 cm cake mould right) Sponge cake In a 26 cm cake mould Christmas cake / Rich fruit cake In a 20 cm cake mould 1) Plum cake In a bread tin 1) Small cakes - one level Small cakes - two levels Biscuits / pastry strips - one level Biscuits / pastry strips - two levels and and In a baking tray In a baking tray In a baking tray In a baking tray Meringues In a baking tray

12 12 TYPE OF DISH Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes Buns In a baking tray 1) Eclairs In a baking tray Plate tarts In a 20 cm cake mould Rich fruit cake In a 24 cm cake mould Victoria sandwich 1) Preheat the oven for 10 minutes. BREAD AND PIZZA TYPE OF DISH In a 20 cm cake mould 1) Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes White bread pieces, 500 gr per piece 1) Rye bread In a bread tin Pizza In a baking tray or a deep pan 1) Scones In a baking tray 1) 1) Preheat for 10 minutes. FLANS TYPE OF DISH Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes Pasta flan In a mould Vegetable flan In a mould Quiches In a mould 1) Lasagne Cannelloni ) Preheat for 10 minutes In a mould 1) In a mould 1)

13 ENGLISH 13 MEAT TYPE OF DISH Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes Beef On a wire shelf Pork On a wire shelf Veal On a wire shelf English roast On a wire shelf beef, rare English roast On a wire shelf beef, medium English roast On a wire shelf beef, well done Shoulder of pork With rind Shin of pork Two pieces Lamb Leg Chicken Whole Turkey Whole Duck Whole Goose Whole Rabbit Cut in pieces Hare Cut in pieces Pheasant Whole FISH TYPE OF DISH Fan Cooking Shelf position Temp [ C] Cooking time [min] Notes Trout / Sea fish bream Tuna fish / Salmon fillets 9.5 Gas Oven Cooking The time does not include preheating. Always preheat the empty oven for 10 minutes.

14 14 Wei ght (kg) TYPE OF DISH Gas Oven Cooking Cooking time in minutes Temp. level ( C) MEAT & POULTRY 1 Beef with bone min. 2 or Beef without bone or Lamb min. 2 or Pork or ,2 Chicken / Rabbit or Duckling or Turkey or ,5 Casseroles min. 2 or Baked vegetables min. 2 PASTRY Fruit tart Fruit pie min. 2 or 3 35 Sausage rolls or 3 20 Chaux pastry or Vol au vents or 3 15 Jam tarts or PUDDINGS Egg Custard in a Bain Marie min. 2 or CAKES Rich fruit cake min. 2 or Plain fruit cake min. 2 or Madeira min. 2 or Small cake min Ginger bread min BREAD Notes varies according to the vegetable in a 26 cm aluminium mould on the wire shelf in a 20 cm mould on the wire shelf

15 Wei ght (kg) TYPE OF DISH Temp. ( C) level Gas Oven Cooking Cooking time in minutes 0,5 Bread loaves or Bread loaves or Rolls and buns or Biscuits or Grilling Notes in the aluminium baking tray in the aluminium baking tray Preheat the empty oven for 10 minutes, before cooking. Quantity Grilling Cooking time [min] TYPE OF DISH Pieces [g] Shelf position Temp [ C] 1st side 2nd side Fillet steaks max Beef steaks max Sausages 8-4 max Pork chops max Chicken (cut in max ) Kebabs 4-4 max Breast of chicken max Hamburger max Fish fillet max Toasted sandwiches max Toast max Turnspit Preheat the empty oven for 10 minutes, before cooking. TYPE OF DISH [g] Shelf position Temp [ C] ENGLISH 15 Cooking time [min] Poultry max Roasts max

16 CARE AND CLEANING Refer to the Safety chapters. Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. To clean metal surfaces use a usual cleaning agent. Clean the oven interior after each use. Fat accumulation or other food remains may result in a fire. The risk is higher for the grill pan. Clean stubborn dirt with a special oven cleaner. Clean all oven accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent. If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can destroy nonstick coating. Stainless steel or aluminium appliances: Clean the oven door with a wet sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials, as they can cause damage to the oven surface. Clean the oven control panel with the same precautions Cleaning the door gasket Regularly do a check of the door gasket. The door gasket is around the frame of the oven cavity. Do not use the appliance if the door gasket is damaged. Contact the Service Centre. To clean the door gasket, refer to the general information about cleaning Cleaning the oven door You can remove the oven door to clean it. Removing the oven door 1. Open the door fully and hold the two door hinges.

17 ENGLISH Lift and turn the levers on the two hinges. 3. Close the oven door to the first opening position (halfway). Then pull forward and remove the door from its seat. Put the door on a soft cloth on a stable surface. Clean the oven door with water and soap. Dry the oven door carefully. When the cleaning is completed, install the oven door. To install the oven door, do the above steps in the opposite sequence Oven lamp Be careful when you change the oven lamp. There is a risk of electrical shock. Before you change the oven lamp: Deactivate the oven. Remove the fuses in the fuse box or deactivate the circuit breaker. Put a cloth on the bottom of the oven to prevent damage to the oven light and glass cover. 1. Turn the glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the oven light bulb with an applicable 300 C heat-resistant oven light bulb. Use the same oven lamp type. 4. Install the glass cover.

18 WHAT TO DO IF Refer to the Safety chapters. Problem Possible cause Remedy The appliance does not operate. The appliance does not operate. The oven lamp does not operate. Steam and condensation collect on the food and in the oven. The flame is blown out immediately after ignition. If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The appliance is not activated. The fuse in the fuse box is released. The oven lamp is defective. You left the dish in the oven for too long. The thermocouple is not sufficiently heated. Activate the appliance. Refer to the chapter "Daily Use". Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician. Replace the oven lamp. Do not keep the dishes in the oven for longer than minutes after the cooking ends. After lighting the flame, keep the knob pushed for approximately 15 seconds. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. We recommend that you write the data here: Model (MOD.)... Product number (PNC)... Serial number (S.N.) TECHNICAL DATA Total rating Electric: 1,7 kw Gas: G20 (2H) 25 mbar = 2,5 kw G30/G31 (3B/P) 30/30 mbar = 2,5 kw G25.1 (2HS) 25 mbar = 2,5 kw Electric supply: 230 V ~ 50 Hz Category: II2HS3B/P Gas Supply: G20 (2H) 25 mbar Appliance class 3

19 ENGLISH Gas Oven Burner Data Gas type Natural gas (G20) Liquid gas (G30/ G31) Natural gas (G25.1) Injector mark 1/100 mm Nominal gas power 102 2,5 Nominal gas flow Reduced gas power By-pass needle Nominal gas pressure kw g/h kw 1/100 mm mbar - 1,0 Reg , , / ,5-1,0 Reg INSTALLATION Refer to the Safety chapters Safety for installation These installation instructions are for authorized persons only! Let only authorized persons (gas and electricity) do the installation, connection and maintenance of the appliance. If you do not refer to an authorized person, the guarantee becomes invalid if there is damage. Follow the correct procedure and the instructions in this user manual for installation, operation and maintenance of gas and electrical appliances. Before installation, make sure that the local supply conditions (the type of gas and the gas pressure) and the adjustment of the appliance are compatible. The adjustment conditions for this appliance are located on the label or rating plate. The manufacturer is not responsible for damages caused by an installation which does not agree with the instructions in the manual. Installation environment: This appliance is not connected to a combustion products evacuation device. Only install the appliance in a room with sufficient ventilation. Keep natural ventilation holes open or install a cooker hood. There must be a 130 cm² minimum opening in the built-in cabinet. The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood). Prolonged inten-

20 20 sive use of the appliance may call for additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present Gas connection The gas supply ramp is on the rear side of the control panel. Do not use rubber flexible pipes! D E A B C Before the gas connection, disconnect the mains plug from the mains socket or deactivate the fuse in the fuse box. Close the primary valve of the gas supply. C A) Flexible metallic pipe B) Gasket C) Gas supply ramp A B A) Rigid metallic pipe B) Nut C) Olive D) Male / female adapter E) Gas supply ramp 1. Do not fully put the oven into the built-in cabinet (approximately 30 cm). There are two connection modes: a) Connection with a flexible metallic pipe (maximum length: 2 m): Put the supplied gasket between the pipe and the gas supply ramp. Turn the pipe to the 1/2" gas supply ramp. b) Connection with a rigid metallic pipe (soft copper, minimum diameter: 8 mm): Use a male / female adapter (not supplied) to install the nut and the olive on the gas supply ramp. Put the pipe into the gas supply ramp. 2. Use a 22 mm spanner to tighten the nuts. Keep the gas supply ramp in the correct position. Do not apply force to the gas supply circuit. Do not use a flame to control for leaks! 3. Fully move the oven into the built-in cabinet. Follow the instructions in "Building-in the Appliance"

21 ENGLISH Seal the connection correctly. Use a leak detection to control it. Do not squeeze the gas supply ramp and the pipe when you move the oven into the built-in cabinet Adjustment to different types of gas B Let only an authorized person do the adjustment to different types of gas. A This appliance is for operation with natural gas. With the correct injectors, you can also operate it with another type of gas. The gas rate is adjusted to suit. Replacing the gas oven burner injector: 1. Remove the bottom plate of the oven cavity (A) for access to the gas oven burner (B). C 2. Release the two screws (C) which keep the gas oven burner in position.