Lista lucrărilor publicate

UNIVERSITATEA TEHNICĂ din CLUJ-NAPOCA FACULTATEA CONSTRUCȚII de MAȘINI DEPARTAMENTUL INGINERIA SISTEMELOR MECANICE Prof. dr. ing. ANTAL Tiberiu Alexandru B-dul Muncii, nr. 103-105, 3400, CLUJ-NAPOCA, ROMÂNIA : 0040-264-401667 E-mail: antaljr@bavaria.utcluj.ro WEB: http://www.east.utcluj.ro/mb/mep/antal/index.htm Lista lucrărilor publicate I. Îndrumătoare de laborator 1. MARCU, V., ANTAL, T., BOTA, D., AutoCAD - Îndrumător de laborator, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.104. 2. MARCU, V., ARGHIR, M., MORAR, S., ANTAL, T., Informatică tehnicã, vol. 1 - Lucrări de laborator, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.83. 3. ANTAL, T. A., Elemente de Java cu JDeveloper - îndrumător de laborator, Editura UTPRES, 2013, p.150, ISBN: 978-973-662-827-6 4. ANTAL, T. A., Java - Iniţiere - îndrumător de laborator, Editura UTPRES, 2013, p. 246, ISBN: 978-973-662-832-0. II. Cursuri universitare l. MARCU, V., ANTAL, T., MORAR, S., PLITEA, D., LUPEA, L, BERTEAN, M., Informatică tehnică, volumul l, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.321. III. Cărți 1. MARCU, V., ORLANDEA, C., ANTAL, T., Wordperfect pentru documente tehnice, Editura DACIA, 1994, p. 166, ISBN 973-350520-X. 2. TIUCĂ, T., PRECUP, T., ANTAL, T., Dezvoltarea aplicațiilor cu AutoCAD şi AutoLISP, Editura Promedia Plus Computers, 1995, p. 303, ISBN 973-96862-2-2. 3. ANTAL Tiberiu Alexandru, Microsoft Access 97 şi 2000 în 14 cursuri, Editura Todesco, 2000, p. 299, ISBN 973-99779-6-0. 4. ANTAL Tiberiu Alexandru, Limbajul C ANSI, Editura RISOPRINT, 2001, p. 253, ISBN 973-656-065-1. 5. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript și ASP, Editura RISOPRINT, 2003, p.224, ISBN 973-656-361-8. 6. ANTAL Tiberiu Alexandru, Visual BASIC pentru ingineri, Editura RISOPRINT, 2003, p.244, ISBN 973-656-514-9. 7. Adalbert ANTAL, Gheorghe KEREKES, Tiberiu ANTAL, Ovidiu TATARU, Horia GORGOI, Zahnradgetriebe Transmisii cu roți dințațe, 2004, p. 221, UTPRES, ISBN 973-662-142-1. 8. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript și ASP - ediția a II-a, Editura RISOPRINT, 2006, p.264, ISBN 973-751-349-5. IV. Lista lucrărilor științifice publicate 1992 l. ANTAL, A., ANTAL, T., Egalizarea alunecărilor, între flancurile dinților, în punctele de angrenare unipare, MTM VI Timișoara, Simpozion Național, Transmisii mecanice, Volumul 2, lucrarea 19, 1992, p. 19.1-19.12 1993 1

2. ANTAL, T., PÎSLĂ, A., Software interface to create access of the numerical controlled machine tools at the CAD/CAM specialised software. 4th international DAAAM Symposium, Technical University of Brno, Czechia, 16-18 September 1993, Separat- Nr.:02. 3. ANTAL, A., ANTAL, T., Un program de calcul pentru angrenajele melcate. MTM '93 Cugir-Romania, a II-a conferință științifică internațională mașini și tehnologii moderne, Construcția de Mașini nr. 10-11-12, 14-16 octombrie 1993, p.27-29. 1994 4. PÎSLĂ, A., ANTAL, T., PLITEA, D., Studies concerning the design of an CAD/CAM software dedicated to the flexibilisation of the classical NC machine tool, 5.th International DAAAM Symposium, University of Maribor - Slovenia, 27-29th October 1994, p.345-346. 5. PÎSLĂ, A., COMŞA, S., ANTAL, T., Studies concerning the design of the variable elasticity piston rings, 5.th International DAAAM Symposium, University of Maribor - Slovenia, 27-29th October 1994, p.347-348. 1995 6. NAGY, K., PÎSLĂ, A., ANTAL, T., Szerszámgépek tengelyeinek szamítógéppel való vezérlesé, microcad '95, International Computer Science Conference, Section F: Production engineering, manufacturing systems, 23th February 1995, p.121-126. 7. ANTAL T., PÎSLĂ, A., CAD/CAM manufacturing software on CNC milling machines with horizontal and vertical axle, microcad '95, International Computer Science Conference, Section F: Production engineering, manufacturing systems, 23th February 1995, p.79-82. 8. GYENGE, Cs., ANCĂU, M., ANTAL, T., KEREKES, L., Allgemeiner Algorithmus fur die Festlegung der optimalen Bearbeitungsreihenfolge in flexiblen Fertigungssystemen, Automation und Messtechnik, Austria, 4/1995, p.162-164. 9. ANTAL, A., ANTAL, T., Posibilități de optimizare a parametrilor geometrici la angrenajele elicoidale, MTeM '95, Cugir, A III-a conferință științifică internațională mașini și tehnologii moderne, Volumul l, 12-14 octombrie 1995, p.l-4. 10. ANTAL, A., ANTAL, T., Modszer a csavakereker méreteinek optimális meghatározása. Conferință Internațională de Inginerie Mecanică - OGÉT '95, Cluj-Napoca / Kolozsvár. 1995 aprilie 8, p.1-7. 11. NAGY, K., MORAR, L., POPESCU, S., PÎSLĂ, A., ANTAL, T., Comanda în viteză și poziție a axelor numerice utilizând calculatoare PC, MTeM '95 - Cugir, România, A II-a Conferință științifică internațională mașini și tehnologii moderne, Volumul 1, 12-14 octombrie 1995, p.321-324. 12. PÎSLĂ, A., ANTAL, T., PÎSLĂ, D., Programarea asistată de calculator a roboților destinați acoperirilor prin proiectare termică de pulberi, știință și tehnologie, industrie - Simpozion organizat în cadrul Zilelor Academice Clujene, 27 octombrie 1995, p.101-104. 1996 13. ANTAL, A., ANTAL, T., Methods for choosing the addendum modification, microcad'96, International Computer Science Conference 29 th February 1996, Miskolc, Hungary, p. 39-43. 14. K. NAGY, A. PISLĂ, T. ANTAL, A. LÁSZLÓ, The Parallell Control of Two Numerical Axes Using Personal Computer, microcad'96, International Computer Science Conference 29 th February 1996, poster. 15. NAGY, K., MORAR, L., POPESCU, S., PÎSLĂ, A., ANTAL, T., LASZLO, A., Hardware aspects concerning the speed and position control of numerical axes using a personal computer, A'96-THETA 10 A3 Section - Intelligent motion control. Robotics. Intelligent Manufacturing systems. CAD Cluj-Napoca, 23-24 May 1996 p.333-336. 2

1998 16. ANTAL, A., ANTAL, T., Program de calcul pentru alunecările în angrenajele elicoidale. PRASIC '98 - SIMPOZIONUL NAȚIONAL cu participare internațională, Braşov, Vol. II - Organe de Mașini. Transmisii Mecanice, 5-7 Noiembrie 1998, p.235-238, ISBN 973-98796-0-8. 1999 17. ANTAL, A., ANTAL, T., A csavarkerekek számítása kiegyenlitett relativ csúszásra. Conferință Internațională de Inginerie Mecanică - OGÉT '99 - VII. Országos Gépész Találkozó, Felixfürdő, 1999. április 23-25., p.60-63, ISBN 9739203426. 18. ANTAL, T. A., Planar mechanism synthesis using genetic algorithms, Acta Technica Napocensis, Series: Applied Mathematics and Mechanics. No. 42, Vol. II, 1999, p.55-60, U. T. PRESS - The Technical University form Cluj-Napoca, Romania, ISSN 1221-5872. 2000 19. ANTAL, A., ANTAL, T. A., Program a fogprofilok közótt fellépő csúszási tényezők sebességének számítására, Conferință Internațională de Inginerie Mecanică - VIII. OGÉT (Országos Gépész Találkozó), 2000 aprilie/április 7-9, p. 116-119, Târgu- Mureș/Marosvásárhely, Románia. 20. ANTAL, A., ANTAL, T. A., A computer program for the sliding equalizing at the helical gears, The 8-th Symposium on Mechanisms and Mechanical Transmissions - with international participation, p.17-22, 19-22 October 2000, Timișoara, România, ISBN: 973-585-179-2; 973-585-181-4. 2001 21. ANTAL, B., MIKES, I., ANTAL, T. A., A kúpkerekek fogazása metszőkerékkel, Conferință Internațională de Inginerie Mecanică - OGÉT '2001 - IX. Országos Gépész Találkozó. Kolozsvár. 2001. április 26-28, p.31-37, ISSN 1454-0746. 22. ANTAL, B., ANTAL, T. A., Fogaskerékhajtások fogfelütelei között megjelenő csúszások meghatározása, Conferință Internațională de Inginerie Mecanică - OGÉT '2001 - IX. Országos Gépész Találkozó. Kolozsvár. 2001. április 26-28, p.13-18, ISSN 1454-0746. 2002 23. MIKES, I., ANTAL, T. A., A marási mélység meghatarozasa ferdefogú evolvenskúpkerekel esteben. Conferință Internațională de Inginerie Mecanică - OGÉT '2002 - X. Országos Gépész Találkozó. Szekelyudvarhely. 2002. április 25-28, p.195-199, ISSN 1454-0746. 24. ANTAL, B., MIKES, I., ANTAL, T. A., Kúpkerekek fogazása csigamaróval. Conferință Internațională de Inginerie Mecanică - OGÉT '2002 - X. Országos Gépész Találkozó. Szekelyudvarhely. 2002. április 25-28, p.36-40, ISSN 1454-0746. 25. BOJAN, ȘT., ANTAL, T., TĂTARU, O., BÂRLEANU, C., The determination of the imaginary rack-bar in the case of the spur gearing with curved directix. Lucrările Științifice ale Simpozionului Internațional "Universitaria ROPET 2002" - Inginerie Mecanică 2. 17-19 octombrie 2002, Petroșani, p.249-252, Editura FOCUS, ISBN 973-8435-22-6. 26. ANTAL, A., ANTAL, T. A., Studiul angrenării unui melc cilindric cu o roată dințată conico-evolvetică. PRASIC '02 - Lucrările celui de al VII-lea SIMPOZION NAȚIONAL CU PARTICIPARE INTERNAȚIONALĂ, BRAȘOV, 7-8 noiembrie 2002, Vol. I - Mecanisme și Tribologie, p.249-252, Editura UNIVERSITĂȚII TRANSILVANIA din BRAȘOV, ISBN 973-635-064-9. 27. BOJAN, ȘT., TĂTARU, O., BÂRLEANU, C., ANTAL, T., The equation of the teeth flanks surfaces of the curved spur wheels determination. PRASIC '02 - Lucrările celui de al VII-lea SIMPOZION NAȚIONAL CU PARTICIPARE INTERNAȚIONALĂ, 3

BRAȘOV, 7-8 noiembrie 2002, Vol. II - Organe de mașini. Transmisii mecanice, p.261-264, Editura UNIVERSITĂȚII TRANSILVANIA din BRAȘOV, ISBN 973-635-064-9 28. BOJAN, Șt., ANTAL, T., CĂZILĂ, A., TURCU, I., Determination of the meshing equation at the curved spur wheels generation (processing). PRASIC '02 - Lucrările celui de al VII-lea SIMPOZION NAȚIONAL CU PARTICIPARE INTERNAȚIONALĂ, BRAȘOV, 7-8 noiembrie 2002, Vol. II - Organe de mașini. Transmisii mecanice, p.251-256, Editura UNIVERSITĂȚII TRANSILVANIA din BRAȘOV, ISBN 973-635-064-9. 29. ANTAL, T. A., Mechanism displacement analysis with AutoLisp in AutoCAD, Series: Applied Mathematics and Mechanics, Nr. 45, 2002, U. T. PRESS - The Technical University form Cluj-Napoca, Romania, p.19-24, ISSN 1221-5872. 30. BOJAN, Șt., ANTAL, T., TĂTARU, O., TURCU, I., Programme for the determination of the imaginary rack-bar in the case of the spur gearing with curved directrix, Acta Tehnica Napocensis, Series: Applied Mathemtics and Mecanics, Nr. 45, 2002, U. T. PRESS - The Technical University form Cluj-Napoca, Romania, p.135-140, ISSN 1221-5872. 2003 31. ANTAL, T. A., The traverse of a tree stored using the relational data model, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 1, 2003, p.25-30, ISSN 1221-5872. 32. ANTAL, T. A., ASP component for database access developed in Visual BASIC, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 1, 2003, p.31-40, ISSN 1221-5872. 33. ANTAL, A., ANTAL, T. A., Ferdefogu kupkerekek fogazasa metszokerekel / Toothing with wheel-cutter of the helical bevel gears, OGÉT 2003, 11 th International Conference in Mechanical Engineering, Cluj, 8-11 May 2003, p. 15-18, ISBN 973-86097-2-0. 34. BOJAN, Șt., BÎRLEANU, C., SUCALĂ, F., ANTAL, T., Generating the cylindrical gear with curve teeth. Machine tool for this proceeding. MTeM 2003. 6 th International Conference Modern Technologies in Manufacturing, Technical University from Cluj- Napoca, 2-4 October 2003, p.57-60, ISBN 973-656-490-8. 35. ANTAL, T. A., Visual basic class for simple surface representation with hidden face removal, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 2, 2003, p.15-24, ISSN 1221-5872. 36. ANTAL, T. A., Surface generation in catia v5r11 defined by parametrical equations in visual basic using activex automation, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 2, 2003, p.7-14, ISSN 1221-5872. 2004 37. ANTAL, T. A., Solid gear generation in autocad using Activex Automation and Visual Basic, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. III, 2004, p.57-62, ISSN 1221-5872. 38. ANTAL, T. A., ACCESS to an ORACLE DATABASE using JDBC, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. III, 2004, p.63-68, ISSN 1221-5872. 39. ANTAL, T. A., Utilization of the relational databases in the storage and retrieval of mechanisms. Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. IV, 2004, p.7-14, ISSN 1221-5872. 40. ANTAL, T.A., Accesing an ORACLE database from PSP, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. IV, 2004, p.15-24, ISSN 1221-5872. 2005 41. ANTAL, T. A., ANTAL B., Algoritmus a csigahatások főparamétereinek meghatározására / Algoritm pentru calculul parametrilor principali ai angrenajelor melcate / Worm gears main parameters design algorithm, Revista Műszaki Szemle, 29 szám, p.3-8, 2005, ISSN 1454-0746. 4

42. ANTAL Tibor Sándor, ANTAL Béla, Program a hengeres csigahajtások teherbírásának optimális számítására / Program for optimized calculation of the cylindrical worm gears load bearing capacity. XIII. Nemzetközi Gépész Talákozó / 13 th International Conference in Mechanical Engineering / A XIII-a Conferință Internațională de Inginerie Mecanică, OGÉT 2005, Satu Mare, April 28 - May 1, 2005, p. 21-25, ISBN: 973-7840-03-8. 43. ANTAL, T.A., An object based approach to planar mechanisms simulation, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. I, 2005, p.37-44, ISSN 1221-5872. 44. ANTAL, T.A., Aspects concerning code reusabilty in planar mechanisms simulation, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. I, 2005, p.45-50, ISSN 1221-5872. 45. ANTAL, T.A., Accessing ORACLE data from Microsoft Access using ODBC and ADO, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. IV, 2005, p.235-242, ISSN 1221-5872. 46. ANTAL, T.A., Data access methods from Visual BASIC to Oracle, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. IV, 2005, p.243-252, ISSN 1221-5872. 47. ANTAL, T. A., CSIBI, V., Mechanizmus generálása SolidEdge-ben Visual Basic-ból / Generarea mecanismelor în SolidEdge din Visual Basic / Mechanism generation in SolidEdge from Visual Basic, Revista Műszaki Szemle, 32 szám, p.3-8, 2005, ISSN 1454-0746. 2006 48. ANTAL Tibor Sándor, ANTAL Béla, Számítási algorítmus a jó hatásfokkal működő csigahajtások tervezéséhez, Computational algorithm for the design of the good efficiency wormgears. XIV. Nemzetközi Gépész Talákozó / 14 th International Conference in Mechanical Engineering / A XIV-a Conferință Internațională de Inginerie Mecanică, OGÉT 2006, Tg. Mures, April 27-30, 2006, p. 30-33, ISBN(10): 973-7840-10-0. 49. ANTAL, T.A., Midlet Implementation using Eclipse, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 49, Vol. I, 2006, p.27-36, ISSN 1221-5872. 50. ANTAL, T.A., Using MathCAD for the sliding equalization, at the points where the gearing starts and ends, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 49, Vol. V, 2006, p.51-56, ISSN 1221-5872. 51. ANTAL Tibor Sándor, ANTAL Béla, Egy számítási módszer a hidrodinamikus kenéssel működő csigahajtások esetében / A computational method for the hydrodynamic lubricated worm gears, Revista Műszaki Szemle, 36 szám, p.3-7, 2006, ISSN 1454-0746. 2007 52. ANTAL Tibor Sándor, ANTAL Béla, A térben kapcsolódó fogfelületek között megjelenő csúszási tényezők meghatározása / The calculus of the sliding coefficients between the teeth surfaces at space meshing gear, / 15 th International Conference in Mechanical Engineering / A XV-a Conferință Internațională de Inginerie Mecanică, XV OGÉT 2007, Kolozsvár, publicat în revista Műszaki Szemle, 38 szám, p.41-44, 2007, ISSN 1454-0746. 53. Adalbert ANTAL, Horia GORGOI, Tiberiu Alexandru ANTAL, The generation of the surfaces for the leadscrew with threaded planetary rollers, ADEMS 07 - The 1 st International Conference Advanced Engineering in Mechanical Systems - Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 50, vol. II, 2006, p.241-244, ISSN 1221-5872. 54. ANTAL, T.A., An object oriented implementation for the study of the sliding 5

equalization, at the points where the gearing starts and ends, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 50, Vol. I, 2007, p.33-38, ISSN 1221-5872. 55. ANTAL, T.A., Using Oracle JDeveloper 10g to build a Miscrosoft Access database Java interface, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 50, Vol. VII, 2007, p.33-38, ISSN 1221-5872. 2008 56. ANTAL Tibor Sándor, ANTAL Béla, Egy módszer a profileltolás tényezők meghatározására a csavarkerékpárok esetében / A method for choosing the specific addendum modification at helical spur gears / O metodă pentru determinarea deplasărilor specifice de profil în cazul angrenajelor elicoidale, / 16 th International Conference in Mechanical Engineering / A XVI-a Conferință Internațională de Inginerie Mecanică, XVI OGÉT 2008, Braşov, publicat în revista Műszaki Szemle, p.32-37, 1-4 mai, 2008, ISSN 1454-0746. 57. ANTAL, T.A., ANTAL, A., The study of the specific sliding at helical gears for different axle angles with matlab, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 51, Vol. II, 2008, p.51-56, ISSN 1221-5872. 58. ANTAL, T.A., ANTAL, A., An object oriented model for the study of the specificaddendum modifications based on the sliding and relative velocities equalization at helical gears, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 51, Vol. II, 2008, p.45-50, ISSN 1221-5872. 2009 59. Tiberiu Alexandru Antal, Adalbert Antal, Mariana Arghir, Determination of the addendum modification at helical gears, at the points where the meshing starts and ends, based on the relative velocity equalization criterion (p 10965-10966), Proceedings in Applied Mathematics and Mechanics - PAMM Journal, Volume 8, Issue 1, p.10965-10966 - December 2008 (10003-10988), Published Online: Feb 26 2009 1:06AM, DOI: 10.1002/pamm.200810965, ISSN: 1617-7061. Copyright 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. (online) - http://www3.interscience.wiley.com/journal/91016652/issueyear?year=2008. 60. T. A. Antal, A NEW ALGORITHM FOR HELICAL GEAR DESIGN WITH ADDENDUM MODIFICATION, SCIENTIFIC JOURNAL "MECHANIKA", Nr. 3(77), 2009, Kaunas University of Technology, Vilnius Gediminas Technical University, and the Lithuanian Academy of Sciences, p.53-57, ISSN 1392-1207. http://zurnalas.mechanika.ktu.lt/?action=journal&nr_id=15. -ISI 61. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Geometrical dimensions of helical gears with equalized relative velocities at the beginning and the ending of the meshing, Computational Kinematics, Andres Kecskemethy, Andres Muller Editors, Springer- Verlag, 2009, p. 385-392, Springer-Verlag, ISBN 978-3-642-01946-3, Duisburg, Germany, DOI: 10.1007/978-3-642-01947-0, http://www.springer.com/engineering/book/978-3-642-01946-3. -ISI Pro 62. ANTAL Tiberiu Alexandru, ANTAL Adalbert, A method for the determination of the geometrical dimension of the helical gears with increased lifetime, Published in: Digital Ecosystems and Technologies, 2009. DEST '09. 3rd IEEE International Conference on Digital Ecosystems and Technologies, Publication Date: 1-3 June 2009, On page(s): 530-533, Location: Istanbul, Turkey,ISBN: 978-1-4244-2345-3, Digital Object Identifier: 10.1109/DEST.2009.5276781,Current Version Published: 2009-10-02. -IEEE+ISI Pro 63. ANTAL Tiberiu Alexandru, Eficiency of crossed helical gears with equalized slinding coefficients, Annals of DAAAM for 2009 & Proceedings of 20th DAAAM International Symposium, Volume 20, No. 1, ISSN 1726-9679, ISBN 978-3-901509-70-4, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria, EU, 2009, p. 1017-1018. -ISI Pro 6

64. ANTAL, T.A., GUI's in JDeveloper, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 52, Vol. IV, 2009, p.27-32, ISSN 1221-5872. - B+ 65. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Helical Gear Dimensions in the Case of the Minimal Equalized Specific Sliding, The 10 th, IFToMM International Symposium on Science of Mechanisms and Machines, SYROM 09, October 12-15, 2009, Braşov, Romania. (in Editura Springer-Verlag GmbH, Editor: Visa Ion, ISBN 978-90-481-3521-9). -ISI Pro 2010 66. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Worm gears with optimized main geometrical parameters and their efficiency, Journal MECHANIKA, Issue: 1, Pages: 62-65, Published: 2010, Publisher: KAUNAS UNIV TECHNOL, LAISVES AL 55, KAUNAS, 44309, LITHUANIA, IDS Number: 572OJ, ISSN: 1392-1207, 2009 Impact Factor 0.780. -ISI 67. ANTAL Tiberiu Alexandru, ANTAL Adalbert, The use of genetic algorithms for the design of mechatronic transmissions with improved operating conditions, 3rd International Conference on Human System Interaction May, University of IT and Management in Rzeszow, Poland, 13-15, 2010. IEEE + ISI Pro. 68. ANTAL Tiberiu Alexandru, ANTAL Adalbert, A design method of crossed axes helical gears with increase uptime and efficiency, In: New Trends in Mechanism Science, Analysis and Design, Series: Mechanisms and Machine Science, Vol. 5, D. Pisla el al. (Eds.) Springer Science+Business Media B.V. 2010, p. 641-648 69. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Cylindrical worm gears with improved main parameters, In: New Trends in Mechanism Science, Analysis and Design, Series: Mechanisms and Machine Science, Vol. 5, D. Pisla el al. (Eds.) Springer Science+Business Media B.V. 2010, p. 625-632. 70. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Determination of the geometrical dimensions of the helical gears with addendum modifications based on the specific sliding equalization model, In: Advanced Techniques in Computing Sciences and Software Engineering, Khaled Elleithy Editors, Springer Netherlands, 2010, 85-90, DOI: 10.1007/978-90-481-3660-5_15 (http://dx.doi.org/10.1007/978-90-481-3660-5_15). - ISI Pro 71. ANTAL, T.A., Programming AutoCAD using JAWIN from Java in JDeveloper, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 53, Vol. III, 2010, p.481-486, ISSN 1221-5872. - B+ 2011 72. ANTAL, T.A., A new algorithm for cylindrical worm gears dimensioning based on the hydrodynamic lubrication conditions between the teeth flanks, MECHANIKA, Issue: 4, Pages: 400-403, Published: 2011, Publisher: KAUNAS UNIV TECHNOL, LAISVES AL 55, KAUNAS, 44309, LITHUANIA, IDS Number: 572OJ, ISSN: 1392-1207. 2010 Impact Factor 1.144 - ISI 2012 73. ANTAL, T.A., Some aspects of graphical process simulation in Visual Basic, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 55, Vol. I, 2012, p.51-56, ISSN 1221-5872. / B+. 74. Carmen Anca Huniadi, TIBERIU ALEXANDRU ANTAL, Florin Stamatian, The effects of Ulipristal on surgically induced endometriosis in a rat model, Gineco.ro 28 (2/2012). B+ 2013 75. Carmen Anca Huniadi, Ovidiu L. POP, TIBERIU ALEXANDRU ANTAL, Florin Stamatian, The effects of Ulipristal on Bax/Bcl-2, Cytochrome C, Ki-67 and Cyclooxygenase-2 expression in a rat model with surgically induced endometriosis, European Journal of Obstetrics & Gynecology and Reproductive Biology, 2013, PII: 7

S0301-2115(13)00167-X, doi:10.1016/j.ejogrb.2013.03.022, ISSN: 0301-2115. (http://www.journals.elsevier.com/european-journal-of-obstetrics-and-gynecology-and-r eproductive-biology/), 5-Year Impact Factor: 1.839 - ISI 76. ANTAL, T.A., A design method of the cylindrical worm gears, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 56, Vol. II, 2013, p.299-302, ISSN 1221-5872. - BDI. 2014 77. ANTAL, T.A., Addendum modification of cylindrical spur gears with equalizaed powers lost by friction between the teeth flanks at the points where the meshing stars and ends, ACTA TECHNICA NAPOCENSIS, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics, and Engineering, Vol. 57, Issue III, September 2014, pp.329-334, ISSN 1221-5872. BDI (http://www.atna-mam.utcluj.ro/index.php/acta/article/view/387/376). 78. ANTAL, T.A., The power lost by friction, between the teeth flanks, for cylindrical spur gears, at the points where the meshing stars and ends, acta technica napocensis, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics, and Engineering, Vol. 57, Issue I, September 2014, pp.7-10, ISSN 1221-5872. BDI (http://www.atna-mam.utcluj.ro/index.php/acta/article/view/171/167). 2015 79. ANTAL, T.A., Programming Canvas x pro 16 using scripting technologies, acta technica napocensis, acta technica apocensis, Series: Applied Mathematics, Mechanics, and Engineering, Vol. 58, Issue II, 2015, pp.151-156, ISSN 1221-5872. - BDI (http://www.atna-mam.utcluj.ro/index.php/acta/article/view/532). 2016 80. ANTAL Tiberiu Alexandru, Addendum modification of spur gears with equalized efficiency at the points where the meshing stars and ends, MECHANIKA, Issue: 6, Pages: 480-485, DOI: 10.5755/j01.mech.21.6.12480, 2015/Published in 2016, 2014 Impact Factor: 0.292 - ISI. IV. Cursuri postuniversitare 1. În perioada 2000-2001 am conceput și am predat cursul Crearea și exploatarea bazelor de date relaționale, la Alba-Iulia și Cluj-Napoca, în cadrul Școlii Academice de Studii Postuniversitare Informatică Aplicată și Programare din cadrul Departamentului pentru Educație Continuă și Învățământ la Distanță (D.E.C.I.D.) al UTC-N. 2. Începând din anul 2002 am conceput și predat, în cadrul Cursului Postuniversitar de Specializare în Informatică Tehnică materiile, cursurile: Calcul tabelar, crearea bazelor de date relaționale (Access și, la cerere, Excel ); Programare în limbajul Visual Basic for Applications (VBA); Exploatarea bazelor de date relaţionale (Microsoft Access 97, 2000 si 2002). V. Doctorat Teza de doctorat este întitulată: "Sisteme de integrare a unor baze de date neomogene pentru sinteza mecanismelor", conducator Prof. dr. doc. şt. ing. SZEKELY Emeric, titul de doctor obținut la data de 10 iulie 1998 la UNIVERSITATEA TEHNICĂ din CLUJ - NAPOCA în specializarea mecanisme. 20. IV. 2016, la Cluj-Napoca PROF. DR. ING. ANTAL TIBERIU ALEXANDRU 8