972/2006 FI 1511 90 19 10, 1511 90 91 10, 1513 11 10 10, 1513 19 30 10, 1513 21 10 10, 1513 29 30 10 Palm oil, coconut oil (cobra oil), palm kernel oil, for the manufacture of: - industrial monocarboxylic fatty acids of subheading 3823 19 10 - mixtures of methyl esters of fatty acids of subheading 3824 90 99 - hydrotreated biodiesel oil of subheading 2710 19 41 - hydrotreated bioasoline of subheading 2710 11 90 - methyl esters of fatty acids of heading 2915 or 2916 - stearic acid of subheading 3823 11 00 or - goods of heading 3401 (TNOO3) 1098 CZ 2825 90 40 Tungsten oxide 1040 LT 2836 20 00 Disodium carbonate, consisting of sodium carbonate not less than 99 %, powder, intended use for glass production 1060 DE 2841 90 85 Lithium cobalt oxide with a Co content of at least 59.0% 432/1/1994 DE (eredeti kérelmezı:be) (végfelhasználási cél kiterjesztése biodízelre és biogázolajra); elızı tárgyalási körben is napirenden volt! n.a. t/év 2903 39 90 20 1,1,1,2,3,3,3-Heptafluoropropane eltörlése iránti kérelem (DE termelés létezése miatt) 1011 IT 2904 10 00 Sodium toluene-4-sulfonate (4-Toluene Sulfonic Acid, Sodium Salt) n.a. DE 2905 59 10 10 2-Choroethanol, for the manufacture of liquid thioplasts of subheading 4002 99 90 (1) Létezı vámkontingens (09.2950) emelése iránti kérelem: 12000 t/év n.a. FR 2912 42 00 Etil-vanillin (3-etoxi-4-hidroxi-benzaldehid) Létezı vámkontingens (09.2624) emelése iránti kérelem: 850 t/év (?) 1045 NL 2914 19 90 Heptan-2-one 1046 NL 2914 19 90 3-methylbutanone 1047 NL 2914 19 90 Pentan-2-one, containing by weight less then 10 percent of 4-methylpentan-2-one as an impurity 1012 IT 2914 39 00 Stearoyl Benzoyl Methane (Phenylcosane-1,3-dione) 1013 IT 2914 39 00 Benzophenone (Benzoylbenzene, BZQ, Diphenyl ketone, Diphenylmetathone) 1014 IT 2914 39 00 1,3-Diphenyl-1,3-Propanedione (1,3-Diphenylpropane, 1,3-diphenyl-2Benzoylacetophenone, Dibenzoyl-methane) - 1 -
- 2-1015 IT 2914 50 00 2,2-dimethoxy-2-phenylacetophenone (benzil dimethyl ketale, BDK) 1076 FR 2914 50 00 16-alpha,17-alpha-epoxy-3-beta-hydroxypregn-5-en-20-one 1016 IT 2916 39 00 4-tert-Butylbenzoic acid (PTBBA) 1028 PL 2918 22 00 Acetylsalicylic acid (2-(acetyloxy)benzoic amid) 120 t/év 1074 FR 2920 90 10 Diallyl 2,2'-oxydiethyl dicarbonate 1017 IT 2922 49 95 Ethyl 4-dimethylaminobenzoate (4-(N,N-dimethylamino)benzoic acid ethyl ester, EDB) 1081 BE 2922 49 95 1,2,4-thiadiazole-3-acetic acid 5- [(ethoxycarbonyl)amino]-methyl ester 1022 GB 2924 29 95 Anthranilamide 20000 t/év 1027 GB 2924 29 95 Denatonium Benzoate ( Benzenemethanaminium, N-[2-[(2,6-dimethylphenyl)amino]-2- oxoethyl]-n,ndiethyl-, benzoate; Benzyldiethyil [(2,6 xylylcarbamoyl) methyl] ammonium benzoate ) 910/2006 TR 2926 10 00 00 Acrylonitril A létezı, 2007. július 1-jétıl növekedı kvóta (09.2977) megemelése iránti kérelem 1082 BE 2930 20 00 S-(phenylmethyl)dipropylcarbamothioate 1018 IT 2930 90 85 Diphenyl sulfide 1019 IT 2930 90 85 Triphenylsulfonium chloride (TPSC) 1020 IT 2930 90 85 2-isopropyltioxanthone (ITX) 1061 DE 2930 90 85 2-amino-4-methylsulfonyl-N-methylaniline 1062 DE 2930 90 85 3-bromomethyl-2-chloro-4-(methylsulfonyl)-benzoic acid 1079 FR 2930 90 85 Organo-sulphur compound: Clethodim herbicide 1004 ES 2932 29 85 Epsilon Caprolactone Monomer (Hexan-6-Olide) 1691/1-3/2001 DE (eredeti kérelmezı: n.a.) 2940 t/év 2933 19 90 10 4,5-Diamino-l-(2-hydroxyethyl)-1_H_-pyrazole sulfate eltörlése iránti kérelem (DE termelés létezése miatt) 1077 FR 2933 79 00 5 -vinylpirrolidone 1023 GB 2935 11 00 Tetrahydrofuran (THF)
1026 SK 3105 40 00 Ammonium dihydogenorthophosphate (monoammonium phosphate) containing: - 52% or more by weight of assimilable phosphorus in calculation at Phosphorus Pentoxide, - 12 (±1) % by weight of nitrogen, - 1% or less by weight of moisture, - 50 mg/kg or less of cadmium in Phosphorus Pentoxide, - 30 mg/kg or less of chrome, - 30 mg/kg or less of lead, - 20 mg/kg or less of arsenic, - 2 mg/kg or less of mercury with ph value 4,5 or more for 10% solution and in the form of granules containing by weight: - 3% or less of a maximum diameter of 1mm, - 95% or more of a diameter more than 1mm but not exceeding 4 mm and without surface modification. 1063 DE 3204 15 00 10 Farbstoff C.I. Vat Orange 7 (CI. Pigment Orange 43) 1064 DE 3204 17 00 Colouring agent C.I. Pigment Yellow 97 821/2006 NL 3204 20 00 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) vámtarifaának (2934999076) megváltoztatása iránti kérelem 1083 BE 3208 90 91 Solution containing : polyhydroxyamide, gamma-butyrolactone, photoactive components (naphthoquinone ester derivate or tosylate) and whether or not containing: 2-methoxy-1-methylethlylacetate, aryl silicic acid, alkoxy silane, polyamic acid 1049 NL 3402 13 00 Surfactant containing 2 oxirane, methyl-, polymer with oxirane, 1,4-dimethyl-1,4- bis(2- methylpropyl)-2-butyne-1,4-diyl ether (Surfynol 2502) 1050 NL 3402 13 00 Defoaming agent containing 2-ethyihexyloxymethyl oxirane (Surfynol MD-20 Defoamer) 1084 BE 3506 91 00 Solvent based silicone pressure sensitive adhesive comprising phenyl polydimethylsiloxane gum. - 3 -
1089 IE 3506 91 00 Double sided clear acrylic and / or rubber transfer adhesive of a thickness not less than 3mils and not exceeding 5mils and of widths not less than 45.7cm and not greater than 78.5cm on a poiy coated paper release liner, all of a total thickness not less than 8mils and not greater than 10.5mils with an initial peel adhesion release value of not less than 15N/25mm n.a. t/év 1085 BE 3707 90 90 Acenaphtalene copolymer in ethyllactate solution (OTOKOGI) 993/2006 PL 3804 00 90 10 Sodium lignosulphonate 2007. július 1-tıl nyíló féléves kvóta megújítása és megemelése iránti kérelem: 85000 t/év 1078 FR 3808 93 27 Organic solution of Clethodim 1005 AT 3815 90 90 Catalyst consisting of titanium dioxide and tungsten trioxide [, in the form of powder,] [containing: - 89 % or more by weight of titanium dioxide, - not more than 11 % by weight of tungsten trioxide and - not more than 3 % of sulfuric acid] 1052 NL 3815 90 90 16 Initiator, based on dimethylaminopropyl urea, for the manufacture of polyurethane foam systems (a) 1051 NL 3824 90 98 Preperation with a basis of 2,5,8,11 -tetramethyl-6-dodecyn-5,8-diol ethoxylate. (DynoI TM 604) 1066 DE 3824 90 98 Liquid crystal mixture for use in manufacture of displays.(1) 1075 FR 3824 90 98 Alkyl carbonate-based preparation, also containing a UV absorber, used in the manufacture of organic spectacle lenses 1071 FI ES 3824 90 99 Plant sterols in the form of granules, pastills, prills or flakes obtained from wood or soya oil containing by weight - 75% or more of sterols, - not more than 25% of stanols used as raw material for stanol ester. 800t/év : end use törlése 2007.07.01-tıl életbe lépı vámkontingens által lefedett áru. E vámfelfüggesztéssel egyidejőleg a kvóta is módosulna és csökkenne (ld. 1072 sz. kérelmet) - 4 -
1072 FI 3824 90 99 Plant sterols in the form of powder obtained from wood, soya or rape seed oil containing by weight - 75% or more of sterols, - not more than 25% of stanols used as raw material for stanol ester n.a. DE 3902 30 00 94 Chloriertes Polypropylen, mit [auch durch Maleinsäureanhydrid chemisch modifiziert], mit einem Gehalt an Chlor von 23 GHT 15 GHT bis 26 GHT 70 GHT und an Epoxidharz von weniger als 5 GHT 2007.07.01-tıl életbe lépı vámkontingens módosítása iránti kérelem. Mennyiség csökkenne 4000 tonnáról 1500 tonnára (összefügg 1071/07 kérelemmel) 1048 NL 3903 30 00 Acrylonitrilebutadienestyrene (ABS) containing by weight 58 percentage of polybutadiene (ABS CHT) 1067 DE 3907 99 19 Poly(4,4'-isopropylidene diphenylene) terephthalate/isophthalate (Polyarylate (U100)) 1054 NL 3911 90 19 Poly[(ethyleneimine)-co-(ethyleneimine dithiocarbamate)], in aqueous solution of sodium hydroxide 1053 NL 3912 11 00 Cellulose acetate in the form of flakes 22500 t/év 1086 BE 3919 90 31 Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymethylmetacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner. 1030 PL 3919 90 61 Polarizer film in rolls supported on one or both sides by transparent material, to be cut into the shape of LCD module 1087 BE 3919 90 61 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm. 1031 PL 3919 90 90 Poly (ethylene terephthalate) film, with a contact potential difference of 2gf/25mm (0,0196N/25mm) or more but not more than 6gf/25mm (0,0588N/25mm) and an electrostatic discharge of not more than 0.5kV, used in the manufacturing of LCD modules - 5 -
1712/3/1997 FR (eredeti kérelmezı: n.a.) 3920 62 19 61 3920 62 19 63 Film of a total thickness of 4,5 µm (± 0,16 µm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm 2 (± 2 kg/mm 2 ) and a tensile strength (in the machine direction) of more than 28 kg/mm 2, and of an anti-adherent coating 1065 DE 3924 90 98 4-methoxysalicylaldehyde, dissolved in N-methyl pyrrolidone 1041 LT 5205 22 00 Cotton yarn (other than sewing thread), containing 85% or more by weight of cotton, not put up for retail sale; single yarn, of combed fibres measuring is 246 decitex with error 2%. 1042 LT 5205 23 00 Cotton yam (other than sewing thread), containing 85% or more by weight of cotton, not put up for retail sale; single yarn, of combed fibres: measuring is 197 decitex, with error 2% 1043 LT 5205 24 00 Cotton yam (other than sewing thread), containing 85% or more by weight of cotton, not put up for retail sale; single yarn, of combed fibres: measuring is 148 decitex, with error 2% eltörlése iránti kérelem (FR termelés létezése miatt) 350 t/év 1000 t/év 767 t/év 1024 IT 5407 10 00 Textile fabric, consisting of warp yarns of polyamide 6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of therephtalic acid, p-phenylendiamine and 3,4 oxybis (phenyleneamine), as staple-lenght fiber (spun) form 1044 LT 5501 30 00 Acrylic or modacrilylic filament tow 4000 t/év 1080 FR 5607 21 00 Binder and baler twine of sisal 1600 t/év 1068 DE 6902 90 00 Refractory bricks with - a TiO 2 content of no more than 1% and - an Al 2 O 3 content of no more than 0.4% and - a change in volume of less than 9% at 1700 C n.a. GB 7002 10 00 10 Balls of E-glass, of a diameter of 20.3 mm 18.5mm and more but not exceeding 26mm. 1021 GB 7002 10 00 10 Balls of E-glass, of a diameter of 20,3 18.5mm and more but not exceeding 26mm. 1056 NL 7006 00 90 Glass plate of a diagonal size of 81,28cm (± 1,5cm) or more, but not exceeding 185,42cm (± 1,5cm), provided either with a mesh film or a sputtered conductive layer for EMC shielding and a near-infrared absorbing film, with optional additional anti-reflex/color enhancement layers on one or two sides, for use in the manufacture of products falling within heading 8528 (a). Hasonló vámfelfüggesztés: 70070090-6 -
EU hivatkozási 1039 LT 7408 11 00 Copper wire rod with the maximum diameter 8 mm ±0,3 mm. intended for use in the manufacture of installation wires and cables, and enameled round wires. 1073 FR 7601 20 99 Sheets and billets of secondary aluminium alloy containing lithium 1069 DE 7607 20 99 Aluminium laminated film with a total thickness of 0.123 mm (+/- 0.010 mm), comprising an intermediate layer of aluminium with a thickness (excluding the base film) of 0.040 mm (+/- 0.002 mm), a base film of polyamide, a base film of polypropylene and a protective coating against corrosion by hydrofluoric acid 1099 CZ 8101 96 00 Wire of tungsten 1100 CZ 8102 96 00 Wire of molybdenum 1008 AT 8407 33 90 10 8407 90 80 10 8407 90 90 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cc and a power of not less than 6 kw but not exceeding 15,5 20,0 kw, for the manufacture of: - self-propelled lawn mowers, with a seat of subheading 8433 11 51 - tractors of subheading 8701 90 11, whose main function is that of a lawnmower or - four-stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 (1) 1009 AT 8407 90 10 10 Four-stroke petrol engines of a cylinder capacity of not more than 250cm3 for use in the manufacture of lawnmowers of sub-heading 8433 11, mowers with motor of subheading 8433 20 10, rotovators of sub-heading 8432 29 50, scarifiers of subheading 8432 80 00 or garden shredders of sub-heading 8436 80 99 1097 TR 8414 30 20 Rotary type compressor, consisting of a single phase motor with a cooling power range between 2Kw to 8Kw for use in the manufacture of outdoor air conditioning units 1092 IE 8419 89 98 Clean room Parylene Deposition Apparatus used for applying Parylene polymer to material for use in the manufacture of Drug-Eluting Stents. 1093 IE 8419 89 98 Solution Preparation Apparatus for the treatment of materials by a process involving a change of temperature for use in the manufacture of Drug-Eluting Stents. (10L Jacketed Reactor Gen-3) 1090 IE 8462 21 80 Machine tools for working metal for use in the manufacture of Drug-Eluting Stents. 1091 IE 8477 59 80 Machinery for working rubber or plastic for use in the manufacture of Drug-Eluting Stents 5000 t/év - 7 -
EU hivatkozási 1029 PL 8504 31 80 Coil trans (Coil trans is responsible for boosting DC voltage from 24V to 1kV level and isolates high-voltage parts from low-voltage parts.) 1101 CZ 8504 40 84 Inverter having a power handling capacity not exceeding 7,5 kva, for driving lamps in a backlight unit. It applies AC High Voltage to fluorescent lamps. This inverter contains transformer and controlling and driving circuits and it is used for a supply of a particular voltage for LCD modules. In case of 32 module, the applied voltage is approximately 2,200 Vrms. 1010 AT 8507 80 30 Lithium-ion-accumulator, with a distance between the poles of 55 mm or more, for use in the manufacture of rechargeable power-supply units for incorporation in electric motorcycles of subheading No 8711 90 00 (1). 1025 SK 8522 90 80 Blu-ray drive unit is designed for reproducing/recording of optical signal from/to DVD disc and reproducing of optical signal from CD and Blu-ray disc comprising at least: - optical pick up unit with three kinds of laser: = blue colour laser beam wave length 405nm for reproducing of optical signals from Blu-ray disc, = red colour laser beam wave length 662nm for recording/reproduction of optical signals to/from DVD disc, = red colour laser beam wave length 785nm for reproduction of optical signals from CD disc, - Spindle motor, - Stepping motor, - Drive control print circuit board, - Motor driver integrated circuit, - Memory integrated circuit, for use in the manufacture of products falling within subheading No 8521 (1) 1058 NL 8522 90 80 Hard disk drive, for incorporation in products of heading 8521 (1) 1102 CZ 8529 90 65 Electronic modules which drive addressing pixels (ADMxxx). These modules are solely designed for a production of plasma display modules and include semiconductor chips, for providing electric pulses with certain electrodes in order to generate gas discharge at designated cell in a glass panel of plasma display module. - 8 -
EU hivatkozási 1103 CZ 8529 90 65 Scan Driver Rigid (SDR-D), scan driver boards containing semiconductor chips, for providing electric pulses to be scanned to certain electrodes in a glass panel. It is solely designed for a production of plasma display modules 50 and 42. These boards are of two dimensions for 50 : 10,5 mm x 257 mm x 66 mm; for 42 : 9,8 mm x 230 mm x 65,6 mm. 1104 CZ 8529 90 65 SDR-U (Scan Driver Rigid).; Scan driver boards containing semiconductor chips, for providing electric pulses to be scanned to certain electrodes in a glass panel. It is solely designed for a production of plasma display modules 50 and 42. These boards are of two dimensions for 50 : 10,5 mm x 257 mm x 66 mm; for 42 : 9,8 mm x 230 mm x 65,6 mm 1105 CZ 8529 90 65 TCON Timing Converter Board. Printed circuit board containing active and passive electronic elements. Except others this board contains monolithic integrated circuit (TCON Timing Convertor) which converts synchronized signal from TV circuit and generates signal pulses for LCD driving. This board is fixed on a rear side of TFT/LCD module. 999/2006 PL 8539 39 00 Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter not exceeding 5 mm and with a length of more than 120 mm but not exceeding 1570 mm, for incorporation in backlight units of LCD modules (1) 1057 NL 8543 90 90 Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back (Cellframe) 1106 CZ 8544 42 90 XFPCxx (x-flexible cable). A flexible printed cable, solely designed for plasma display modules. It is used for connecting between certain sustain electrodes and certain printed circuit boards in a glass panel. Conducting part is made from Cu/Ni, pins are made from Au/Cu/Ni. Conducting part is coated by polyimide. 1107 CZ 8544 42 90 YFPCxx (y-flexible cable). A flexible printed cable, solely designed for plasma display modules. It is used for connecting between certain scan electrodes and certain printed circuit boards in a glass panel. Conducting part is made from Cu/Ni, pins are made from Au/Cu/Ni. Conducting part is coated by polyimide. 1070 DE 8548 90 90 47 Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm 440 µm or more but not exceeding 660 nm µm, contained in a lead frame housing having a circular opening whose exterior dimensions without fittings do not exceed 4 x 4 mm 12x12 mm 2007. július 1-tıl érvényes vámfelfüggesztés megújítása iránti kérelem - 9 -
EU hivatkozási 1055 NL 8704 22 91 Motor chassis with a self-ignition capacity of at least 8,500 cm 3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machineries, to be built in special purpose vehicles with a width of at least 300 cm to distribute fertilizers (1). 1088 BE 9001 20 00 Thin micro-louvre optical film which allows on-axis transmission of an image, while blocking off-axis transmission (to enable a typical viewing angle of 600 measured from the surface normal). 1108 CZ 9001 90 00 Front filter. Naked glass panels with special printing and film coating. It is used as a filter of a plasma display panels 50 and 42. Front filters are of the following dimensions: 1186 mm x 698 mm (50 ) and 1007 mm x 606 mm (42 ). It intercepts unnecessary ultraviolet rays and the electromagnetic radiation noise generated from the plasma panel. It is fitted mechanically with metal fittings and the screw. 1094 TR 9032 10 20 9032 10 81 9032 10 89 1095 TR 9032 10 20 9032 10 81 9032 10 89 1096 TR 9032 10 20 9032 10 81 9032 10 89 Damper thermostat with an opening temperature of +7 C, closing temperature of -4 C (±1.5 C) for use in the manufacture of no frost refrigerators Freezer thermostat with an opening temperature of -18 C(±1.5 C), closing temperature of -22 C (±1.5 C) for use in the manufacture of no frost refrigerators Bimetal thermostat with an opening temperature of 8 C(±3 C) for use in the manufacture of no frost refrigerators 1059 NL 9405 40 39 Light emitting diode (LED) [Ambient light] module, for incorporation in products of heading 8528 with a screen diagonal measurement of 66,04 cm or more (1) Áruosztályozási döntés szerint a korábban a 8432 vtsz, (0% vám) alatt importált árut a 8704 (22% vám) alá kell osztályozni 2007. április 12. * Kódok: AT=Ausztria, BE=Belgium, BG=Bulgária, CY=Ciprus, CZ=Csehország, DE=Németország, DK=Dánia, EE= Észtország, ES=Spanyolország, FI=Finnország, FR=Franciaország, GB=Nagy-Britannia, GR=Görögország, IE=Írország, IT=Olaszország, LT=Litvánia, LU= Luxemburg, LV=Lettország, MT=Málta, NL=Hollandia, PL=Lengyelország, PT=Portugália, RO=Románia, SI=Szlovénia, SK=Szlovákia, SV=Svédország, TR=Törökország - 10 -