TELJESÍTMÉNYNYILATKOZAT sz. 0069 HU 1. A terméktípus egyedi azonosító kódja: fis her EA II feszítődü el 2. Felhasználás célja(i): Termék Fé dü elek eto a törté ő felhasználásra (nagy terhelhetőség Re deltetésszerű hasz álat Repedés e tes eto a utólag eszerelhető rögzítőele, Lásd függelék, mellékletek B 1 - B 4 3. Gyártó: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, 72178 Waldachtal, Németország 4. A eghatal azott képviselő: -- 5. Az AVCP-rendszer(ek): 1 6a. Harmonizált szabvány: --- Bejelentett szerv(ek): --- 6b. Az európai értékelési dokumentum: ETAG 001; 2013-04 Európai űszaki értékelés: ETA-07/0135; 2016-12-09 A űszaki értékelést végző szerv: DIBt Bejelentett szerv(ek): 1343 MPA Darmstadt 7. A yilatkozat a szereplő teljesít é y ek : Mechanikus szilárdság és stabilitás (BWR 1) Fo tos jelle ző Statikus és kvázistatikus behatásokkal szembeni ellenállás, displacements Teljesítmény ld. a Mellékletet, különösen ezt a mellékletet: C 1 - C 4 Tűzvédele (BWR 2) Fo tos jelle ző Viselkedése tűz eseté Tűzállóság Teljesítmény A dübel megfelel az A1-es osztály követelményeinek. TNM 8. Megfelelő űszaki doku e tá ió és/vagy egyedi űszaki doku e tá ió: --- A fent azonosított termék teljesítménye megfelel a bejelentett teljesítmény(ek)nek. A 305/2011/EU rendeletnek egfelelőe e teljesít é y yilatkozat kiadásáért kizárólag a fe t eghatározott gyártó a felelős. A gyártó evé e és részéről aláíró sze ély: Andreas Bucher, Dipl.-Ing. Wolfgang Hengesbach, Dipl.-Ing., Dipl.-Wirtsch.-Ing. Tumlingen, 2016-12-15 - Ez a Teljesít é y yilatkozat külö öző yelveke elkészült.. Vitás értelmezés esetén az angol verzió az irányadó!. - A elléklet a yelvse leges for á a egadott törvé yi előírásoko túl ö ké tese egadott, kiegészítő információkat is tartalmaz angolul.
Appendix 1 / 12 Specific Part 1 Technical description of the product The fischer drop-in anchor EA II is an anchor made of galvanized or stainless steel which is placed into a drilled hole and anchored by deformation-controlled expansion. The fixture shall be anchored with a fastening screw or threaded rod. The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) Essential characteristic Characteristic resistance for static and quasi-static loading, displacements Performance See Annex C 1 to C 4 3.2 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance Anchorages satisfy requirements for Class A1 No performance assessed 3.4 Safety in use (BWR 4) The essential characteristics regarding Safety in use are included under the Basic Works Requirement Mechanical resistance and stability. 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base In accordance with guideline for European technical approval ETAG 001, April 2013 used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011 the applicable European legal act is: [96/582/EC]. The system to be applied is: 1 Fraunhofer IRB, ID: Fischerwerke
Appendix 2 / 12
Appendix 3 / 12
Appendix 4 / 12
Appendix 5 / 12
Appendix 6 / 12
Appendix 7 / 12
Appendix 8 / 12
Appendix 9 / 12
Appendix 10 / 12
Appendix 11 / 12
Appendix 12 / 12