Polyethylene TIPOLEN FA

Átírás

1 GENERAL PROPERTIES Characteristic: Low density polyethylene copolymer granulate intended for blown film application Used monomer: ethylene (CAS No.: ) Used Co-monomer: n-butyl-acrilate (CAS No.: ) Applied Catalyst system: not used Type of polymerization / License: free radical polymerization with initiator /LyondellBasell Shelf life: quality of this product is stable for 1 year after the production if the storage conditions fulfill the requirements of Technical Data Sheet FOOD CONTACT APPLICATION The composition of this product as supplied from our factory complies with the requirements for use in contact with food of: Commission Regulation (EC) No. 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food, Commission Regulation (EU) No. 10/2011 (14 January 2011) on plastic materials and articles intended to come into contact with food and its amendments such as 1282/2011/EC (28 November 2011), 1183/2012/EC (30 November 2012), 202/2014/EC (3 March 2014), 2015/174/EC (5 February 2015), 1416/2016/EC (24 August 2016), 2017/752 EC ( 28 April 2017) and 2018/79 (18 January 2018) (applies to all EU-Member States). We declare that we use monomers and additives in our production only which are listed in union list of authorized monomers, other starting substances, additives, and polymer production aids of Directive 10/2011/EC ANNEX I. Based on migration experiments with test samples made of this polymer and carried out in the presence of the standard food simulants A, B, C and D at 40 C during 10 days, it is our experience that under these conditions overall migration limits are not exceed 10 mg/dm2. Furthermore we declare that this product does not release substances in detectable quantity listed in 10/2011/EC ANNEX II. We draw your attention to the fact that the EU-Directive 10/2011/EC, which applies to all EU-Member States, includes a limit of 10 mg/dm2 on the overall migration from finished plastic articles into food. In accordance with EU-Directive 10/2011/EC the migration should be measured on finished articles placed into contact with the foodstuff or appropriate food simulants for a period and at the temperature which are chosen by reference to the contact conditions in actual use according to the rules laid down in EU-Directives 97/48/EC (amending 82/711/EEC) and 85/572/EEC. During production of above mentioned product we use n-butyl-acrylate comonomer with SML=6 mg/kg and do not use any SML specified additives according to EU-Directive 10/2011/EC Annex I. EU-Directive 10/2011/EC does not specify residual quantity (QM) limitations on the individual components of this resin.

2 TIPOLEN FA LDPE fólia típus A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál 1 TERMÉKLEÍRÁS TIPOLEN FA , kissűrűségű polietilén fólia típus, amely 1% normál-butil-akrilátot tartalmaz. Termékünket jó ömledékszilárdság és kitűnő feldolgozhatóság jellemzi. Az ebből gyártott filmek kiváló mechanikai és optikai tulajdonságokkal rendelkeznek. A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál ALKALMAZÁSI TERÜLET TIPOLEN FA alkalmas nagy igénybevételű nehézzsákok, agrofóliák, silófóliák, zsugorfóliák, hordtáskák, csomagolófóliák, laminálófóliák előállítására 0,07-0,16 mm vastagságban, valamint kisméretű fúvott termékek, palackok gyártására. TIPOLEN FA alkalmas élelmiszerek és gyógyszerek csomagolására, megfelel az élelmiszeripari és gyógyszeripari felhasználásra vonatkozó nemzetközi előírásoknak. FIZIKAI TULAJDONSÁGOK Test method Unit Typical value Folyásindex (MFR) (190 C /2.16 kg) ISO g/10 perc 0,30 Sűrűség (23 C) * ISO kg/m Szakítószilárdság ** ISO 527-1,3 MPa 21/22 Szakadási nyúlás (H/K) ** ISO 527-1,3 % 300/550 Vicat lágyulási hőmérséklet ISO 306/A120 C 92 Dart ejtőszilárdság (F50)** ISO A módszer g 300 Shore D Keménység ISO Homályosság ISO % 12 Javasolt vastagság mm 0,07-0,16 Typical properties, not to be used as specification. *ISO 293 szabvány szerint préselt lapból készített, ISO 291 szabvány szerint kondicionált próbatesteken mérve **A mechanikai tulajdonságok 2:1 felfúvási aránnyal húzott 0,07 mm vastagságú fólián elvégzett nagyszámú mérések átlagértékei (H = hosszirány, K = keresztirány). FELDOLGOZÁS TIPOLEN FA szokásos feldolgozó gépeken problémamentesen feldolgozható. Ajánlott feldolgozási hőmérséklet C.

3 TIPOLEN FA LDPE fólia típus A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál 2 TÁROLÁS A granulátum 25 kg-os LDPE zsákokban kerül kiszerelésre. Szállításuk sztreccs-csomagolással biztosított raklapokon történik, a rakománysúly 1375 kg polimer. A zsákok között ragasztóanyag található, ezzel elkerülhető a zsákok egymáson történő elcsúszása. A palettáról történő lerakodás során javasoljuk ezt figyelembe venni. A zsákok lerakodása során javasoljuk előbb felemelni a zsákot, majd csak ezt követően elforgatni vagy elvenni. REACH NYILATKOZAT A polimerek nem tartoznak REACH regisztrációs kötelezettség alá. Mindazonáltal a gyártáshoz használt nyersanyagokat (monomerek, katalizátorok és az érintett alapanyagok) regisztráltuk. A MOL Petrolkémia Zrt. teljes mértékben aláveti magát ezen törvényeknek, és csak a REACH-nek megfelelő alapanyagokat használ a gyártás során. Jelenlegi TIPELIN típusaink nem tartalmaznak 0,1%-nál nagyobb mennyiségben ún. különös aggodalomra okot adó (SVHC) anyagokat. BIZTONSÁGI ELŐÍRÁSOK Lásd a Biztonsági adatlapot. ÚJRAFELDOLGOZÁS A Polietilén megfelelő tisztítási és előkészítési folyamatok után különösebb nehézség nélkül újra fel lehet dolgozni. Mivel az újra feldolgozott polimer az előző feldolgozás során már egyszer termikus degradációnak volt kitéve, ezért az újrafeldolgozás során a mechanikai tulajdonságai megváltozhatnak. Ezért célszerű megvizsgálni, hogy az újrafeldolgozás milyen hatást gyakorol a végtermék minőségére. MEGJEGYZÉS 2018 MOL-csoport. Amennyiben a felhasználó jogosult a jelen dokumentumot közzétenni és terjeszteni, ezt a szerzői joggal védett anyagot csak változatlan és teljes formában továbbíthatja, oszthatja meg másokkal, illetve készíthet fénymásolatot róla, beleértve a fejlécet, láblécet, jognyilatkozatot és egyéb adatokat is. A dokumentumot honlapra bemásolni tilos. A MOL-csoport nem garantálja a tipikus (és egyéb) értékeket. Az elemzést reprezentatív mintán és nem a ténylegesen leszállított terméken végezték. A dokumentumban található tájékoztatás csak akkor vonatkozik a megnevezett termékre vagy anyagokra, ha nincsenek más termékkel vagy anyagokkal kombinálva. Az információt az adott időpontban tudomásunk szerint megbízható adatokra alapoztuk, de sem az információ, sem az ismertetett termékek, anyagok, illetve folyamatok kereskedelmi értékéért, adott célra való használhatóságáért, alkalmasságáért, megbízhatóságáért vagy teljességéért nem vállalunk sem kifejezett, sem vélelmezett felelősséget, jótállást vagy egyéb garanciát. A felhasználó a termék vagy anyag, illetve eljárás használatával kapcsolatos döntéseiért saját érdekkörén belül kizárólagos felelősséggel tartozik. Semmilyen, a jelen dokumentumban található információ bárki által történt használatából vagy felhasználásából származó közvetlen vagy közvetett veszteségért, kárért, sérülésért nem vállalunk felelősséget. Egyetlen terméket vagy eljárást sem részesítünk előnyben, és kifejezetten elutasítunk minden ezzel ellentétes feltételezést. A mi, a MOL, vagy MOL-csoport kifejezéseket csak az egyszerűség kedvéért használjuk, ezek vonatkozhatnak egy vagy több MOL tagvállalatra, illetve közvetetten vagy közvetlenül MOL ellenőrzés alatt álló cégre is. Az anyagban használt MOL-csoport elnevezés, a MOLcsoport logója és egyéb termék nevek ha nincsenek másként jelölve a MOL Nyrt. vagy a Slovnaft a.s. tulajdonát képezik.

4 TIPOLEN FA LDPE fólia típus A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál 3 GYÁRTÓ A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál MOL Petrolkémia Zrt Tiszaújváros, Pf.: 20 Magyarország MŰSZAKI VEVŐSZOLGÁLAT MOL Nyrt. Polimer Műszaki Vevőszolgálat 3581 Tiszaújváros, Pf.: 20 Magyarország Telefon: Fax: pts@mol.hu ÉRTÉKESÍTÉS MAGYARORSZÁG H-3581 Tiszaújváros Pf.: 20 Magyarország Telefon: Fax: polymersales@mol.hu SZLOVÁK ÉS CSEH KÖZTÁRSASÁG Vlčie hrdlo Pozsony, Szlovákia Telefon: polymersales@slovnaft.sk ROMÁNIA Str. Danielopolu 4-6 ET1 Sector 1 Cod Bucuresti, Romania Telefon: Fax: petchem@molromania.ro LENGYELORSZÁG Ul. Postępu 17D Warszawa, Poland Telefon: Fax: petchem@slovnaft.pl

5 TIPOLEN FA LDPE fólia típus A MOL Petrolkémia és a SLOVNAFT közös termékcsaládja különféle lehetőségeket kínál 4 UKRAJNA Kiev Stepana Bandery ave., 23, 7th floor, of. 305, Ukrajna Telefon: Fax: JZavojko@mol-ukraine.com.ua HORVÁTORSZÁG, SZLOVÉNIA, SZERBIA, BOSZNIA-HERCEGOVINA, MONTENEGRÓ, MACEDÓNIAI VOLT JUGOSZLÁV KÖZTÁRSASÁG, ALBÁNIA, KOSZOVÓ Zadarska 80 HR Zágráb, Horvátország Telefon: Fax: polymersales@tifon.hr NÉMETORSZÁG Im Trutz Frankfurt 49, D Frankfurt am Main, Germany Telefon: Fax: polymersales@molgermany.de FRANCIAORSZÁG Párizs, Franciaország Mobile Phone: Telefon: husson.iren@fr.tvk.eu AUSZTRIA Walcherstrasse 11A, 7.Stock A Bécs, Ausztria Telefon: Fax: JHauk@molaustria.at OLASZORSZÁG Via Montefeltro, Milano, Olaszország Telefon: Fax: tvkitaly@it.tvk.eu MÁS EURÓPAI ORSZÁGOK Telefon: Fax: polymersales@mol.hu április

6 2 Dual Use Additives: The information provided concerning additives which are also food additives and flavouring is based on our current knowledge. Dual use additives are not used for production of this product. Please note it is responsibility of both the manufacturers of finishing contact articles as well as the industrial food packers to make sure that these articles in their actual use are in compliance with the imposed overall migration requirements. REGULATION (EC) NO 2023/2006 (22ND OF DECEMBER 2006) ON GOOD MANUFACTURING PRACTICE FOR MATERIALS AND ARTICLES INTENDED TO COME INTO CONTACT WITH FOOD We declare that production of this product runs under established, implemented and observed effective and documented quality assurance system certified by ISO 9001, ISO14001 and OHSAS so that, under normal or foreseeable conditions of use, its constituents can not transfer to food in quantities which could endanger human health or bring about an unacceptable change in the composition of the food or bring about deterioration in the organoleptic characteristics. We fulfill the general rules on GMP as laid down in the Articles 5, 6 and 7 of above mentioned commission regulation (EC) No. 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food. Moreover we declare that our production process is in harmony with requirements of Directive 1999/92/EC (16 December 1999) on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres. US FOOD AND DRUG ADMINISTRATION (FDA) This product corresponds FDA (Food and Drug Administration of the USA) Code of Federal Regulations Title (a)(2)(i) related specification: 2.1 and 2.2 EUROPEAN PHARMACOPOEIA (EP) POLYOLEFINES CHAPTER, 9TH EDITION This product complies to EP requirements. KUNSTOFFE Technische Wasser (KTW) declaration This product is not tested for KTW recommendation. Directive 2007/68/EC ( 27 November 2007) amending Annex IIIa to Directive 2000/13/EC regards certain food ingredients (Allergens) We certify, that during manufacturing of this product, we do not use or intentionally incorporate into this product, any of the substances are listed in ANNEX IIIa of this directive. Therefore it is not

7 3 reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Note: 2000/13/EC, 2003/89/EC, 2006/142/EC has been amended by 2007/68/EC Directive 67/548/EEC (27 June 1967) with pertaining 29 amendments, Directive 1999/45/EC (31 May 1999) and Directive 1272/2008 (16 December 2008) relating to the classification, packaging and labelling of dangerous substances This product is not classified as dangerous substance according to the Directive 67/548/EEC and 1999/45/EC, Legal Act of National Council of HU No. 2000/XXV. Law, Publication date: 26/04/2000, Reference: (MNE(2003)54491) During the production of above mentioned product we do not use intentionally any carcinogenic, mutagenic or toxic substances (CMR substances) to reproduction according with the EC 1272/2008. Note(1): 78/631/EEC; 88/379/EEC; 89/178/EEC; 90/492/EEC; 93/18/EEC; 96/65/EC has been repealed by Directive 1999/45/EC acc.to ANNEX VIII. Note(2): 67/548/EEC and 1999/45/EC will be repealed by Directive 1272/2008/EC (16 Dec 2008) with effect from 1 June 2015 DECLARATION OF CODE OF FEDERAL REGULATIONS TITLE 16 CHAPTER II. CONSUMER PRODUCT SAFETY COMMISSION PART 1500 (HAZARDOUS SUBSTANCES AND ARTICLES) This product is not classified as hazardous substance (see Definitions) and does not contain any hazardous substances which are mentioned in CFR 16 Part DIRECTIVE 94/62/EC (20TH OF DECEMBER 1994) ON PACKAGING AND PACKAGING WASTE AND ITS AMENDMENT 2004/12/EC Heavy metals (like cadmium, lead, mercury, hexavalent chromium (CrVI)) and their compounds are not used in manufacturing of, and therefore are not expected to be present in the above mentioned polymer. Therefore it can be declared that this product, as well as the product packaging material, is in compliance with the concentration levels of heavy metals specified in Article 11, item1 of EU-Directive 94/62/EC. This product meets requirements of less than 100 ppm for total incidental cadmium, chromium, lead and mercury. In addition, this product has the potential to be recycled according to these requirements.

8 4 Directive 76/768/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to cosmetic products We certify, that during manufacturing of this product, we do not use or intentionally incorporate into this product, any of the chemicals are listed ANNEX II and ANNEX III part 1 of this directive. Therefore it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Regulation (EC) No. 1223/2009 of the European parliament and of the council of 30 November 2009 on cosmetic products We confirm that this polymer meets the requirements of the 1223/2009/EC. However, this product has not been tested by Regulation (EC) 1223/2009. Directive 76/769/EEC (27 July 1976) relating to restrictions on the marketing and use of certain dangerous substances and preparations and its amendments Polychlorinated biphenyls (PCB) and Polychlorinated ter-phenyls (PCT) are not used in our production technologies and they are not intentionally incorporated into this polymer mentioned by EU-Directive 76/769/EEC. However, this product has not been tested for these chemical substances. Note: Directive 76/769/EEC is superseded by Annex XVII of the REACH Regulation 1907/2006/EC - restrictions on the manufacturing, placing on the market and use of certain dangerous substances, preparations and articles REGULATION (EC) NO 1005/2009 of the (16 September 2009) on substances that deplete the ozone layer ODS (Ozone Depleting Substances such as CFC's, HCFC's, Halons, CCl4, Trichloroethane, HBFC's) We certify, that during manufacturing of this product, we do not intentionally incorporate into this product, any of the chemicals as restricted by this regulation. According to this fact it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Note: Directive 2037/2000 EEC is repealed with effect from 01 January Regulation (EC) No 850/2004 ( 29 April 2004) on persistent organic pollutants and amending Directive 79/117/EEC We certify, that during manufacturing of this product, we do not intentionally incorporate into this product, any of the chemicals as restricted by ANNEX I IV. of this regulation. According to this fact it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances.

9 5 Directive 2005/84/EC relating to restrictions on the marketing and use of phthalates in toys and childcare articles Phthalates such as DEHP, DBP, BBP, DINP, DIDP, DNOP are not used intentionally in manufacturing of, and therefore are not expected to be present in this polymer. This polymer corresponds with Directive 2005/84/EC of the European Parliament and of the Council of 14 December Other Phthalates listed below are not in used intentionally in manufacturing of and therefore are not expected to be present in this polymer. However, this product has not been tested for these chemical substances. Di-benzyl phthalate Di-methyl phthalate Di-ethyl phthalate (DEP) Di-cyclo-hexyl phthalate (DCHP) Di-methoxyl-ethyl phthalate (DMEP) Di-methyl-cyclo-hexyl phthalate (DMCHP) Other phtalates Directive 2011/65/EC ( 8 June 2011) on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) Heavy metals like cadmium, lead, mercury, hexavalent chromium (CrVI) and their compounds and polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) restricted (max. 0,1%) by ANNEX II of this regulation are not incorporated into this polymer intentionally during production. Note: 2002/95/EC has been repealed by Directive 2011/65/EC (8 June 2011) with effect from 3 January 2013 Directive 2000/53/EC (18 September 2000) on end-of life vehicles (ELV) Heavy metals (like cadmium, lead, mercury, hexavalent chromium (CrVI)) and their compounds restricted by this regulation are not incorporated into this polymer intentionally during production. GADSL Declaration Hereby following substances are listed below which are indicated in Global Automotive Declarable Substance List (2013 GADSL v1.0, Released ) and they are present in this polymer product: There is not GADSL substance in formulation of this product Note: in Aug 2005, VDA list of VDA regulation (VDA = Verband der Automobilindustrie) has been replaced by the GADSL.

10 6 Flammability behavior Information about flammability behavior : no information Regulation (EC) No 1895/2005 (18 November 2005) on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food - 2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether, referred to as BADGE (CAS No ), - bis(hydroxyphenyl)methane bis(2,3-epoxypropyl)ethers, referred to as BFDGE (CAS No ); - other novolac glycidyl ethers, referred to as NOGE, are not used in manufacturing of this product therefore it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Directive 2003/11/EC (6 February 2003) on the marketing and use of certain dangerous substances and preparations (pentabromodiphenyl ether, octabromodiphenyl ether) Dangerous substances pentabde (pentabromodiphenyl ether) and octabde (octabromodiphenyl ether) are not used in manufacturing of this product. Therefore it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Directive 2009/48/EC (18 June 2009) on the safety of TOYS and EN 71-3 and EN 71-9 We certify, that during manufacturing of this product, we do not intentionally incorporate into this product, any of the chemicals as restricted by 2009/48/EC ANNEX II. Part III. Chemical properties Tables 11 and 13. According to this fact it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. According to the analytical test results of more polymer material produced by MOL Petrochemicals Co. Ltd. we certify that this product fulfills the requirements of European Standard EN 71 "Safety of Toys", Part 3 (2013) by Directive EU 2009/48/EC as amended in July Moreover EN 71- Part 9 (2005) "Organic chemical compounds - Requirements" (none of the substances listed in Tables 2 A-I are intentionally added). According to this fact it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances.)

11 7 TALLOW AND ITS DERIVATES (BSE/TSE) The concerns relative to BSE/TSE in the context of plastics materials used in contact with food are linked to the use of additives of animal origin: tallow derivatives. Above mentioned polymer is not TSE/BSE dangerous product. BIFMA (Business and Institutional Furniture Manufacturers Association) declaration We certify, that during manufacturing of this product, we do not intentionally incorporate into this product, any of the chemicals as listed by BIFMA e Furniture Sustainability Standard ANNEX B (Chemicals of concern list). According to this fact it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. NANOTECHNOLOGY We certify, that during manufacturing of this product, we do not use Nanotechnology or nanomaterials according to COMMISION RECOMMENDATION 2011/696/EU ( of 18 October 2011) on the definition of nanomaterial. GMO declaration We certify, that product does not intentionally contain any genetically modified organisms. DECLARATION OF OTHER CHEMICAL ELEMENTS As a producer of this product we confirm that during production of this product we do not use below mentioned elements and their derivatives therefore are not expected to be present in this product. However, this product has not been tested for these. Antimony (Sb) Arsenic (As) Conflict minerals: Gold (Au), Tantalum (Ta), Tin (Sn), Tungsten (W) Halogens ( fluor, brom, iod,chlorine ) Phosphorous (yellow and red) Rare Earth Elements Selenium (Se) Uranium (U)

12 8 DECLARATION OF OTHER SUBSTANCES We certify, that during manufacturing of this product, we do not intentionally incorporate into this product, any of the chemicals are listed below and therefore are not expected to be present in this product. However, this product has not been tested for these chemical substances. Acetyl Acetone (ACAC) [CAS No ] 7-acetyl-6-ethyl-1,2,3,4-tetrahydro-1,1,4,4-tetramethylnaphthalene [CAS No ] Acenaphtylene [CAS No ] Acenaphthene [CAS No ] Acetyl tributyl citrate [CAS No ] 4-Aminobiphenyl [CAS No ] and its salts Anthracen [CAS No ] Antrachinon [CAS No ] Acrylamide [CAS No ] Alcohols Alcoholic derivatives Aliphatic Sulphonate Compounds Aromatic Amines (restricted by Directive 2002/61/EC) Amonium Nitrate [CAS No ] Asbestos [Chryolite CAS No ], Amosite [CAS No ], Anthophyllite [CAS No ], Actinolite [CAS No ], Tremolite [CAS No ] Alkyl phenols (APs) derivatives like Ethoxylates (APEOs) and Amines Azocolorants (restricted by Directive 2002/61/EC) Azodicarbonamide [CAS No ] Barium derivatives Benzalkonium chloride (BAC) Benzene [CAS No ] Benzidine [CAS No ] and its salts Benzoic Acid [ CAS No ] Benzo[a]pyren (BaP) [CAS No ] Benzo[a]anthracene [CAS No ] Benzo[b]fluoranthene [CAS No ] Benzo[k]fluoranthene [CAS No ] Benzo[j]fluoranthene [CAS No ] Benzo(g,h,i)perylene [CAS No ] Benzo[e]pyrene [CAS No ] Benzotriazole [CAS No ] Benzophenone [CAS No ]

13 9 Benzylbenzoate [CAS No.: ] Beryllium compounds (including: beryllium-oxide) and beryllium alloy Biocides Bisphenol A (BPA) [CAS No ], Bisphenol B (BPB) [CAS No ], Bisphenol F (BPF) [CAS No ] and Bisphenol S (BPS) [CAS No ] Bis(chloromethyl)ether (BCME) [CAS No ] Bis(2-butoxyethyl) adipate [CAS No ] Blue colorants BNST (Benzenamine, N-phenyl-, Reaction Products with Styrene and 2,4,4-Trimethylpentene) [CAS No ] Boric acid [CAS No ]; borates and perborates Butylated Hydroxytoluene (BHT) [CAS No ] Butylated Hydroxyanisole (BHA) [CAS No ] Catenex PH 941 Cellulose Acetate [CAS No ] Chlorinated alkyl benzenes (CABs) Chrysene [CAS No ] Cobalt-dicloride [CAS No ] 1,2-Cyclohexane dicarboxylic acid diisononyl ester [CAS No ] 4,4'-diaminodiphenylmethane [CAS No ] 4,4'-diaminostilbene [CAS No ] Dibenzo[a,h]anthracene [CAS No ] Dichlorodiphenyltrichloroethane [CAS No ] Dimethylacetamide [CAS No ] Dimethylfumarate [CAS No ] Dimethylformamide (DMF) [CAS No ] Didecyl-dimethylammonium chloride DDAC [ CAS No ] Di-o-tolylguanidine (DOTG) [CAS No ] Dioxin [CAS No ] and its derivatives Epichlorhydrin [CAS No ] Epoxidised Soy-Bean Oil (ESBO) Ethylenediaminetetraacetic acid (EDTA) [CAS No ] and its salts Ethylene glycol dimethylacrilate (EGDMA) [CAS No ] Ethylene/methacrylic acid-zincs copolymer Ethyl-acetone (methyl-propyl-ketone) [CAS No ] Ethylene-oxide [ CAS No Ethylhexanoic acid [CAS No ] Fats

14 10 Flame retardants (all) Fluoranthen [CAS No ] Fluoren [CAS No ] Fluoroelastomers Formaldehide [CAS No ] Fragrances Allergenic fragrances (oak moss, tree moss, isoeugenol [CAS No ]) Hexyl cinnamaldehyde [CAS No ] Cinnamyl alcohol [CAS No ] Hydroxycitronellal [CAS No ] Lyral (Hydroxymethylpentylcyclohexenecarboxaldehyde ) [CAS No ] Majantol (trimethylbenzene propanol) [CAS No ] Furfural [CAS No ] Lilial [CAS No ] Coumarin [CAS No ] Fungicide Furan [CAS No ] and its derivatives Furfural [CAS No ] Glycerol [CAS No ] Glycols ethylene [CAS No ] and propylene [CAS No ] Halogenated HydroCarbons Herbicides Hexachlorobenzene (HCB) [CAS No ] Hexabromocyclododecane (HBCDD) [CAS No , ] 4-Hydroxybenzophenone (CAS No.: ) Indeno(1,2,3-c,d)pyrene [CAS No ] Insecticides Isopropyl thioxanthone (ITX) [CAS No ] Latex and Natural rubbers Lithium Hydroxide (LiOH) [CAS No ] Long-chain Perfluoroalkyl Carboxylates (LCPFACs) Mineral oil aromatic hydrocarbones C>24 (MOAHs) Mineral oil saturated hydrocarbons from C10 to C40 (MOSHs) N-Methylpyrrolidone (NMP) [CAS No ] 4-Methylbenzophenone [CAS No.: ] Musk xylene [CAS No ] Nanomaterials (including Nanoclay, Nanosilver) Naphthalene [CAS No ]

15 11 2-Naphthylamine [CAS No ] and its salts N-butanol [CAS No ] N-Ethyl-o-toluenesulfonamide (NETSA)[CAS No ] N-Ethyl-p-toluenesulfonamide [CAS No ] Ni and Ni-compounds Nickel titanium oxide [CAS No ] Nitrosamines Nitrilotriacetic acid, NTA [CAS No ] Nitrite derivatives Nonylphenoxypoly(ethyleneoxy)ethanol [CAS No ] 1-Nitropropane [CAS No ] 2-Nitropropane [CAS No ] 4-Nitro-BiPhenyl [CAS No ] Melamine [CAS No ] Methylene-Diphenyl-Diisocyanate (MDI)[CAS No ] Octylphenols [CAS No ] and Nonylphenol [CAS No ] o-phenylphenol (OPP)[CAS No ] Oxalic Acid [CAS No ] and its derivatives PALM oil, Coconut Oil and Palm Kerner Oil Parabenes (Esters of Para-hydroxybenzoic-acid) Pentachlorophenol (PCP)[CAS No ] Perfluoroalkyl Sulfonate (PFAS) Perfluorooctane sulfonate (PFOS)[CAS No ] Perfluorooctanoic acid (PFOA) [CAS No ] Perfluorinated carboxylic acids (PFCAs) Perfluoro-alkyl- phosphate esters (PAPs) Pesticides Persistent and very bioaccumulative (vpvb) substances Trichloroethylene [CAS No ] Chromium trioxide [CAS No ] Acids generated from chromium trioxide and their oligomers, Sodium dichromate [CAS No ] Ammonium dichromate [CAS No ] Potassium dichromate [CAS No ] Cobalt(II) sulphate [CAS No ] Cobalt dichloride [CAS No ] Cobalt(II) carbonate [CAS No ] Cobalt(II) diacetate [CAS No ]

16 12 Phenanthren [CAS No ] Phenol [CAS No ] and its derivatives Phthalic Anhydride [CAS No ] P-Hydroxybenzoic Acid [CAS No ] Pigment Green 50 [CAS No ] Polyamide-6 Polychlorinated Biphenyls (PCBs) Polybrominated Biphenyls (PBBs) Polychlorinated Dibenzodioxin (PCDDs) Polychlorinated Furanes (PCDFs) Polychlorinated Terphenyls (PCTs) Polybrominated Diphenyl Ethers (PBDEs) Polybrominated Terphenyls (PBTs) Polycyclic aromatic hydrocarbons (PAHs) PolytetrafluoroEthylene (PTFE, TEFLON) [CAS No ] Preservative / disinfectant 2-Chloroacetamide [CAS No ] Chlorphenesin [CAS No ] Climbazole [CAS No ] Ethyl Lauroyl Arginate-HCl [CAS No ] Isothiazolinone [CAS No ] Methylisothiazolinone [CAS No ] Methylchloroisothiazolinone (CAS No ] Benzisothiazolinone (CAS No ] o-phenylphenol [CAS No ] Proteines PVC [CAS No ] and PVDC [CAS No ] Pyrene [CAS No ] Quaternary Ammonium Compounds Rosin from wood [CAS No ] Rubber (Synthetic and Natural) Semicarbazide [ CAS No ] Short Chain Chlorinated Parrafins (SCCP)[ CAS No ] Silicone [CAS No ] and silica gel [CAS No ] Siloxane D4 [ CAS No ] Siloxane D5 [ CAS No ] Softeners Styrene [CAS No ]

17 13 Sulfates Vinyl Chloride [CAS No ] Tannic acid [CAS No ] Tartrazine [CAS No ] TBT (Tributyl-tin), DBT (dibutyl-tin) and MBT (monobutyl-tin) and dioctyltin compounds (DOT) and other organo-tin compounds Tetrabromobisphenol A (TBBPA)[CAS No.: ] Tetrachloroethene (PERC)[CAS No.: ] Tetraethyleneglycol dimethacrylate (TEGDMA)[CAS No ] Titanium acetyl acetonate (TAA)[CAS No.: ] Trans-2 nonenal [CAS No ] Trichlorbenzene [CAS No ] Trichloroethene (TCE)[CAS No ] Triclosan [CAS No ] Triethanolamine [CAS No ] Trikesylphosphate, Tritolyl phosphate [CAS No ] Trioxide D'antimoine (CAS-Nr ) Tris (nonylphenyl) phosphite (TNPP)[CAS No.: ] Tris(2-butoxyethyl) phosphate (TBEP)[CAS No ] Toluene [CAS No ] UV Filters 2,2 -Methylene-bis-(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol) (MBBT) [CAS No ] Camphor Benzalkonium Methosulfate [CAS No ] 3-benzylidene-camphor [CAS No ] Benzophenone-1 / -2 / -3 [CAS No , , ] Ethylhexyl-Methoxycinnamate (OMC) [CAS No ] Octocrylene, Etocrylene [CAS No , ] Homosalate [CAS No ] 4-Methylbenzylidene Camphor (MBC) [CAS No ] Octyl-Dimethyl-p-Aminobenzoic-Acid (OD-PABA) [CAS No ] Xenohormones Xylenes [CAS No ] DISCLAIMER 2018 MOL Group. To the extent the user is entitled to disclose and distribute this document, the user may forward, distribute, and/or photocopy this copyrighted document only if unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy

18 14 this document to a web site. MOL Group does not guarantee the typical (or other) values. Analysis may be performed on representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials, or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage, or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no endorsement of any product or process, and we expressly disclaim any contrary implication. The terms, we, our, MOL", or MOL Group" are used for convenience, and may include any one or more of MOL Group, or any affiliates they directly or indirectly control. MOL Group, the MOL Group logo, and all other product names used herein are trademarks of MOL Plc. or Slovnaft, a.s. unless indicated otherwise. Date of Issue: 23 April 2018